Airlink101 AWLH6075 guide

WMM Enable: Check this box to enable WMM function. Please click ‘Apply’ button on the right of this check box after you check or uncheck this box, so corresponding settings in this window will be activated or deactivated respectively.

WMM - Power Save Enable: Enable WMM power saving mode to save energy and let your battery live longer.

AC_BK (Background / Low Priority), AC_BE (Best Effort), AC_VI (Video First), and AC_VO (Voice First): Check one or more options; when the checked type of data is transferring, power saving function will be disabled.

Direct Link Setup Enable: Enable or disable direct link setup (DLS) function. This function will greatly improve the data transfer rate between WMM-enabled wireless devices. This function only works when the network card connects to an AP or wireless router with DLS enabled.

MAC Address: Input the MAC address of another WMM-enabled wireless device you wish to establish a direct link here, then click ‘Apply’ to add this MAC address to DLS address table.

Timeout Value: Input the timeout value of this WMM-enabled direct link wireless device. If the wireless device is not responding after this time, it will be removed from DLS table.

Tear Down: If you want to remove a specific wireless device from DLS table, select the device and click this button to remove it.