Uninstalling the AMXUSBLAN Driver
FIG. 16 Confirm Device Removal dialog
Once the system completes the removal of the device, the Device Manager dialog will refresh and the device will no longer appear.
The next time this device is connected to the computer it will appear as a new hardware device and will need to be associated again with the driver.
See the Connecting a Touch Panel via USB section on page 9 for details.
It may be necessary to perform this uninstall procedure for every AMX USB device in the list if you are unsure which one you need to remove.
Refer to your related Modero panel's instruction manual for more detailed information about the firmware setup procedures related to USB as a connection type.
14 | AMXUSBLAN |