AMX NXC-ME260 instruction manual SPE Port Connection/Wiring, Ethernet ports used by the ME260

Page 19

Installation and Wiring

Ethernet ports used by the ME260

Ethernet Ports Used by the ME260

Port type

Description

Standard Port #

 

 

 

ICSP

Peer-to-peer protocol used for both Master-to-Master and Master-to-device

1319 (UDP/TCP)

 

communications.

 

 

For maximum flexibility, the Master can be configured to utilize a different

 

 

port than 1319, or disable ICSP over Ethernet completely from either

 

 

Telnet or the Program Port located on the rear of the Master itself.

 

 

 

 

ICMP

When using version 1.XX of NetLinx Studio, you must be able to PING a

ICMP

 

Master in order to be able to connect to it over a network.

 

 

• Note: NetLinx Studio version 2.0 or higher allows a user the ability to

 

 

turn Off this requirement by de-selecting the "Automatically Ping the

 

 

Master Controller to ensure availability" feature from within the

 

 

TCP/IP Setting dialog (default condition is On).

 

 

 

 

Telnet

The NetLinx telnet server provides a mechanism to configure and

23 (TCP)

 

diagnose a NetLinx system.

 

 

For maximum flexibility, the Master can be configured to utilize a different

 

 

port than 23, or disable Telnet completely from either Telnet or the Program

 

 

Port located on the rear of the Master itself. Once disabled, the only way to

 

 

enable Telnet again is from the Master’s Program port.

 

 

 

 

HTTP

The Master has a built-in web server that complies with the HTTP 1.0

80 (TCP)

 

specification and supports all of the required features of HTTP v1.1.

 

 

 

 

FTP

The NXC-ME260 has a built-in FTP server that conforms to RFC959.

21/20 (TCP)

 

 

 

Internet Inside

The Internet Inside feature the Master uses, by default, is port 10500 for

10500 (TCP)

 

the XML based communication protocol. This port is connected to by the

 

 

client web browser’s JVM when Internet Inside control pages are retrieved

 

 

from the on-board Master’s web server.

 

 

For maximum flexibility, the on-board Master can be configured to utilize a

 

 

different port than 10500 or to disable Internet Inside completely.

 

 

 

 

SPE Port Connection/Wiring

Use an RJ-11 cable to connect the NXC-ME260 to an AXB-SPE Slave Port Expander.

The EXPANSION OUT port on the rear panel of the NXC-ME260 connects to the EXPANSION IN port on the rear panel of the AXB-SPE (FIG. 9).

EXPANSION IN port (RJ-11)

FIG. 9 AXB-SPE (rear panel)

You can daisy chain multiple AXB-SPE's by connecting the EXPANSION OUT on the primary AXB-SPE to the EXPANSION IN port on the secondary, as shown in FIG. 10. The connecting RJ-11 cable should not exceed 6" in length. Repeat this process to connect up to nine AXB-SPE's.

NXC-ME260 NetLinx Master-Ethernet Card/Module

13

 

 

 

 

Page 18 Page 20
Image 19
Page 18 Page 20
Contents NXC-ME260 AMX Limited Warranty and Disclaimer Table of Contents Communication and Firmware Update NetLinx Security with a Terminal Connection Programming Front Rear Program port RS232 Ethernet 10/100 connectorFront and rear panel components Input LED yellow Output LED red Status LED greenNXC-ME260 Specifications SpecificationsRear panel LEDs Ethernet Included AccessoriesOptional Accessories Rear panel LEDs ICSNet/ICSHubProduct Information Program Run Disable PRD mode Setting the Program Port DIP SwitchBaud rate settings Baud Rate SettingsFaceplate Setting the Program Port DIP switchFaceplate Securing Baud rate DIP RedModes and LED Blink Patterns Wiring GuidelinesPreparing captive wires Modes and Front Panel LED Blink PatternsUsing the 4-pin mini-Phoenix connector for data and power Wiring length guidelinesWiring Length Guidelines @ 750 mA Wiring a 2-pin power connectionGND Program Port Connections and WiringLocal +12 VDC power supply coming from the PSN power supply PWR +RS232 Program port front panel ICSNet RJ-45 Connections/WiringPin Program port rear panel ICSHub in port ICSHub RJ-45 Connections/WiringICSHub in Pinouts and Signals RJ-45 Pinout Information EIA/TIA 568 BICSHub OUT port Ethernet 10/100 Base-T RJ-45 Connections/WiringICSHub OUT Pinouts and Signals Ethernet RJ-45 Pinouts and SignalsPort type Description Standard Port # SPE Port Connection/WiringEthernet ports used by the ME260 Ethernet Ports Used by the ME260SPE cable pinout information SPE Connector Pinouts and SignalsProgram NXC-ME260 Installation and Mounting ProceduresMounting the ME260 into an NXS-NMS Mounting the NXS-NMS Into an Equipment RackMaster card slot on NXF CardFrame rear panel Mounting the NXC-ME260 in an NXF CardFrame or NXIMaster Card slot on NXI rear panel Replacing the Lithium Batteries Battery CR2032 type 20mm coin cell SocketInstallation and Wiring Before beginning Communicating with the Master via the Program PortVerifying the current version of NetLinx Master firmware Assigning Communication Settings and Baud RatesSelect Diagnostics Device Addressing from the Main menu Setting the System ValueShowing the current version of the NetLinx Studio Changing the system value on the Modero panel Working with multiple NetLinx MastersPress the System Connection button Device Addressing dialog changing the device value Changing the Device Address on a Netlinx Device301 Changing the device address on the Modero panelRecommended NetLinx Device numbers Axcess Devices use Axcess standardsObtaining the Master’s IP Address using Dhcp Resetting the Factory Default System and Device ValuesNetwork Addresses dialog showing Get IP Assigning a Static IP to the NetLinx Master Select Diagnostics Network Addresses from the Main menuUsed to assign an IP Address Communicating with the NetLinx Master via an IP Assigning Communication Settings and TCP/IP SettingsInstalling New NetLinx Master Firmware via an IP Firmware download status Selected Firmware fileSystem Number Communication and Firmware Update Communication and Firmware Update Safari Yes NetLinx Security web browser and feature supportSupported Browser and Feature Compatibility OS PlatformNetLinx Security Terms New Master Firmware Security FeaturesNetLinx Security Terms WebControl Tab Accessing the NetLinx Master via an IP AddressWebControl Tab Features Default Security ConfigurationDefault Security Configuration Groups section Security Tab FeaturesFeature Description System section Security TabSecurity System Features Security tab Enable SecurityAdd Group Entries Administrator’s user passwordsDefault password can no longer be used to gain access Security tab Add GroupModify Group Entries Security tab Modify GroupDirectories pathnames present on the target Master Security tab Group Directory AssociationsPress Delete to remove the selected group from the list Authorized groups on the MasterGroup Directory Association Entries Valid Directory Association EntriesPath Description Sensitive and must be unique Security Config AccessSecurity tab Add User Add User EntriesModify User Entries Security tab Modify UserMust be unique Security tab User Directory AssociationsNew user is selected Enables access to the user directory and all filesUser Directory Association Entries Subdirectories in that user directoryServer Certificate Entries Security tab SSL Server CertificateCommon Name can not be an IP Address Create Request Takes the information entered into Information from the certificate currently installed onSecurity configuration session, void any changes made to Is an alpha-numeric string 1 50 characters in lengthSecurity tab Import Certificate Security tab Export Certificate RequestShow Devices Tab System TabNetwork Tab Security tab showing NetLinx Master security options Master Security Setup ProceduresSecurity tab showing the Add Group fields Adding a Group and assigning their access rightsSecurity tab showing the Modify Group access rights fields Modifying an existing Group’s access rightsDeleting an existing Group Showing a list of authorized GroupsSecurity tab showing the Group Directory Associations fields Adding a Group directory associationClick the Directory Associations link Confirming the new directory associationDeleting a directory association NetLinx cannot be used since they already exist Adding a User and configuring their access rightsSecurity tab showing the Modify User Configurations fields Modifying an existing User’s access rightsDeleting a User Showing a list of authorized UsersSecurity tab showing the User Directory Associations fields Adding a User directory associationSSL Certificate Procedures City/province name must be fully spelled out Self-Generating a SSL Server Certificate RequestState/province name must be fully spelled out Creating a Request for a SSL Server CertificateYOU can not Request Another Certificate Until the Previous Before importing a CA server certificate, you mustRegenerating an SSL Server Certificate Request Display SSL Server Certificate InformationBefore exiting the Master and beginning another session Common Steps for Requesting a Certificate from a CANetLinx Security and Web Server Security Alert and Certificate popups Accessing an SSL-Enabled Master via an IP AddressClick Next to proceed with the certificate store process Using your NetLinx Master to control the G4 panel ME260 cannot use firmware greater then Using your NetLinx Master to control the G3 panelWhat to do when a Certificate Expires Establishing a Terminal connection NetLinx Security FeaturesInitial Setup via a Terminal Connection NetLinx Security FeaturesStop bits1, and Flow control None default is Hardware Accessing the Security configuration optionsTerminal Option 3 Add user Command DescriptionSecurity Options Menu Option 2 Display system security options for NetLinx MasterEdit User Menu Option 4 Edit UserEdit User Menu Option 7 Add Group Access Rights MenuOption 5 Delete user Option 6 Show the list of authorized usersSubdirectories in the user directory PathGranted to that file Edit Group menu Delete directory association Option 9 Delete Group Option 8 Edit GroupOption 13 Make changes permanent by saving to flash Option 11 Set Telnet Timeout in secondsOption 12 Display Telnet Timeout in seconds Option 10 Show List of Authorized GroupsMain Security Menu Main Security MenuAsked to verify this before the database is reset Help Menu Options Help menuLogging Into a Session Logout Setup SecurityHelp Security PC COM Port Communication Settings Program Port CommandsProgram Port Commands Prompts you to enter the new time for the Master Card Prompts you to enter the new date for the Master CardMaster-to-Master systems Displays the current time on the Master CardDisk Free Or Linux Reboots the Master Card or specified deviceReleases the Dhcp setting for the Master Card To exit pass mode, type + + esc escSends a command to a device. The device can be on any system Sets the Master-to-Master route modeDisplays a list of all devices present on the bus Example Displays a list of any combined devices ExampleMost recent Example Displays the log of messages stored in the Masters memoryMaster logs all internal messages and keeps the most recent If end is not entered, the last 20 messages will be shownNetLinx masters Desired from what device ExampleSystems listed are in numerical order Example ESC Pass Codes ESC Pass CodesLinux Telnet client Windows client programsProgramming NXC-ME260 NetLinx Master-Ethernet Card/Module RevisionLast04/05/04
Related manuals
Manual 48 pages 57.87 Kb

NXC-ME260 specifications

The AMX NXC-ME260 is a cutting-edge piece of machinery designed to meet the demands of modern industrial environments. This equipment stands out due to its superior performance, enhanced efficiency, and innovative technologies, making it suitable for a wide range of applications.

One of the primary features of the NXC-ME260 is its robust design. Built with high-quality materials, this machine is engineered to withstand rigorous operating conditions, ensuring durability and longevity. The compact structure allows it to fit seamlessly into various workspaces, making it an ideal choice for operations with limited space.

Equipped with a powerful motor, the NXC-ME260 delivers exceptional speed and torque. This enables it to handle demanding tasks with ease, resulting in increased productivity. The machine’s advanced control system ensures precise operation, making it user-friendly and efficient. Its intuitive interface allows operators to quickly adapt to its functionalities, minimizing training time and boosting operational efficiency.

The NXC-ME260 integrates state-of-the-art technologies that enhance its performance. One of the standout features is its energy-efficient design, which reduces power consumption without compromising output. This makes the machine not only cost-effective but also an environmentally responsible choice for companies looking to reduce their carbon footprint.

Another significant technology incorporated in the NXC-ME260 is its intelligent monitoring system. This system provides real-time data on machine performance, allowing operators to make informed decisions and perform proactive maintenance. By predicting potential issues before they arise, the NXC-ME260 minimizes downtime and maintenance costs, ensuring uninterrupted operations.

Safety is paramount in any industrial setting, and the NXC-ME260 excels in this regard. It is equipped with multiple safety features, including emergency stop mechanisms and overload protection, ensuring operator safety and reducing the risk of accidents.

In summary, the AMX NXC-ME260 represents a convergence of power, efficiency, and safety-focused design. Its robust construction, advanced motor performance, intelligent monitoring system, and energy-efficient operation make it an invaluable asset for any industrial operation. Whether in manufacturing, logistics, or other sectors, the NXC-ME260 is engineered to enhance productivity while ensuring a safe working environment. Overall, this machine exemplifies the future of industrial equipment, bringing together technology and efficiency for optimal performance.
Top Page Image Contents