Crosley Radio cr-224, crosley explorer instruction manual General Troubleshooting Guide

Page 17

cr224Manual.qxd 9/22/06 11:35 AM Page 17

General

General Troubleshooting Guide

There is no power.

1.Make sure AC to DC power cord is plugged in at the wall and at the back of the unit.

2.Check that the Function Knob is not in the OFF position.

There is no sound.

1.Make sure the Function switch is not in the AUX position.

2.Make sure the mute feature is not on.

The sound is distorted.

1.Adjust the tuner and/or antenna to improve the signal strength. Under certain circumstances, the reception may be improved by relocating the unit.

2.When using the “Aux in” plug, turn off any EQ settings on the portable device.

3.Check the volume level of external device if listening to auxiliary input. It should be set as low as possible.

XM Radio will not work.

1. Check the antenna for signal and location.

15

Image 17
Contents S t r u c t i o n M a n u a l CR-224 ExplorerCr224Manual.qxd 9/22/06 1135 AM Cr224Manual.qxd 9/22/06 1135 AM Welcome FeaturesGetting Started Table of ContentsControl Locators Remote Locators Display Locators Connector Locators Unit Controls Remote ControlBasic Operation Clock Setup Factory Restore Audio SetupContrast Setup Radio Operation Alarm AlarmBattery Back-Up Sleep and Snooze SetupPortable Audio Ready Portable Audio ReadyGeneral General Troubleshooting GuideWarranty Cr224Manual.qxd 9/22/06 1135 AM East Oak Street Louisville, Kentucky