2.52.5” DEVICE FRAME-MOUNTED INSTALLATION
Your Antec Mini Skeleton case has the ability to mount up to two additional 2.5” devices externally on the Frame for additional storage capacity.
1.Align your 2.5” device with the included 2.5” device mounting plates and secure them together with the included screws.
2.Hook the mounting plate along the sides of the Frame.
Note: It may be necessary to remove the motherboard tray and/or side screens as detailed in section 2.6 to effectively route cables to your devices.
2.6REMOVING THE FRAME SIDE SCREEN PANELS
Removing the screens on either side of the Frame will allow access to the lower level of the Component Tray for power and data cable routing.
1.Locate and simultaneously press inward the two tabs on the left and right of the screen panel.
2.Pull the panel away from the Frame.
7