Antec MINUET 300 user manual Cooling System, TriCool fan

Page 6

2.Lift up and slide the drive cage from the case.

3.Place the cage upside down on a flat surface.

4.Note: You must install the external devices first, before installing the internal 3.5” device.

5.Slide the external 5.25” device into the drive cage from the front.

Since the drive cage is upside down, your drive should be too so that it will be properly orientated once the cage is installed in the Minuet II.

6.Align the bottom rear screw holes (one at each side) on the device with the two screw holes (the pair closest to the front of the cage) on the cage and fasten the device with the screws provided.

(See picture 5)

7.Slide the external 3.5” device into the drive cage from the front. Since

the drive cage is upside down, your drive should be too so that it will be properly orientated once the cage is installed in the Minuet II.

8.Align the bottom rear screw holes (one at each side) on the device with the two screw holes on the cage and fasten the device with the screws provided. (See picture)

9.To install the internal 3.5” device, find the two mounting prongs on one side of the bay. With one hand holding the device at a 45-degree angle with the bottom side up, align the two screw holes on

one side of the device with the prongs and slide the device into the bay. (See picture 7)

10.Fasten the other side of the device to the two tabs with the screws provided. (See picture 8.)

11.When sliding the Cage back into the case, work slowly and carefully to

ensure that the front panels of the external devices align properly with the holes provided for them in the bezel.

12. Connect power to each of the devices.

COOLING SYSTEM

The TriCool fan

The case includes one 80mm TriCool fan installed in the side of the chassis. This fan has a three-speed switch that lets you choose between quiet, perfor-

mance, or maximum cooling. We set the default fan speed to “Medium”. (See specifications below) The fan is installed so that the air is blowing out of the case. Connect a large 4-pin connector from the power supply to the male 4-pin connector on the fan. Note: The minimum voltage to start the fan is 5V. We recommend our users to set the fan speed to High if you choose to connect the fan to a fan control. A fan control device regulates the fan speed by varying the voltage to it. The voltage may start as low as 4.5V to 5V. Connecting a TriCool set on Medium or Low to a fan-con- trol device may result in the fan not being able to start. The already lowered voltage from the fan control device will be further reduced by the TriCool circuitry below 5V.

5

Image 6
Contents Minuet Table of Contents Minuet 300 USER’S Manual Setting UP Motherboard InstallationDisclaimer Signal Names Pin POWER/LED ConnectionsConnecting the USB Ports Intel Standard USB Header Pin LayoutConnecting the Audio Ports Connecting the Ieee 1394 FIREWIRE, I.LINK PortStandard Pin Assignment for Ieee 1394 Connector Drive InstallationCooling System TriCool fanNoise SpeedAir Flow Static Pressure Top PanelMinuet 300 Explorer Description

MINUET 300 specifications

The Antec MINUET 300 is an exquisite mini tower case that seamlessly blends style and functionality, crafted for those who appreciate compact design without compromising on performance. Designed for small form factor builds, the MINUET 300 is ideal for users looking to create a powerful workstation or gaming rig in a space-efficient package.

One of the standout features of the MINUET 300 is its sleek and stylish exterior. The case comes with a minimalist design that fits well into any modern environment, making it suitable for both home and office setups. Its compact dimensions do not limit its capability; instead, they allow for a refined aesthetic that enhances any space.

Inside, the MINUET 300 is engineered for versatility. The case supports a range of motherboard sizes, from Mini-ITX to Micro-ATX, providing users with the flexibility to select the components they prefer. It features ample room for expansion, allowing for the installation of multiple storage drives, including two 3.5-inch and three 2.5-inch drives. This means users can enjoy significant data storage capabilities in a compact footprint.

Cooling performance is another critical aspect of the MINUET 300. The case includes multiple ventilation points that support a range of cooling solutions, ensuring that the system remains cool during intense gaming sessions or demanding workloads. Users can install up to five 120mm fans or various radiators, providing options for custom cooling setups.

Antec's commitment to quality is evident in the MINUET 300's build. The case is constructed with high-quality materials to ensure durability and a solid feel. Additionally, cable management is thoughtfully considered, with ample routing options for clean and tidy builds.

For connectivity, the MINUET 300 offers USB 3.0 ports and audio input/output at the front panel, allowing for convenient access to essential connections. This addition reflects Antec's focus on providing a user-friendly experience.

In summary, the Antec MINUET 300 is a sophisticated mini tower case that showcases a perfect blend of aesthetics and functionality. Its intelligent design, robust cooling options, and thoughtful features make it an excellent choice for compact PC builds that require both performance and style.