Size: | 200 x 30 mm three-speed fan |
Rated Voltage: | 12V DC |
Operating Voltage: | 10.8V ~ 13.2V |
Speed (RPM)
High
800
Medium
600
Low 400
Air Flow
3.8m³ / min (134 CFM)
3.1m³ / min (108 CFM)
2.3m³ / min (82 CFM)
| Static | Acoustic |
| Pressure | Noise |
| | |
| 0.7mm-H2O (0.03 inch- | 30 dBA |
| H2O) |
| |
| 0.4mm-H2O (0.02 inch- | 27 dBA |
| H2O) |
| |
| 0.2mm-H2O (0.01 inch- | 24 dBA |
| H2O) |
| |
| | |
4.2Front/Rear TriCool™ Blue LED Fans
The Nine Hundred Two V3 comes with two pre-installed 120 x 25 mm blue LED fans, one in front of each HDD cage to cool the hard drives. These fans are installed so the air will be blown into the case. Each fan comes with a speed control knob at the front of the faceplate. Turn the knob clockwise to increase the speed. The lowest speed is 1200 RPM while the highest speed is 2000 RPM. See the chart below to view the appropriate specifications.
There is one 120 x 25 mm TriCool™ blue LED fan pre-installed at the rear of the case. This fan is installed so the air will be blown out of the case. It has a three-speed switch that lets you choose between quiet, performance, or maximum cooling. This switch is located at the rear of the case. The default fan speed setting is Low.
11
