Antec P280 user manual Rewiring Motherboard Header Connections

Page 20

3.5

Rewiring Motherboard Header Connections

There may come a time when you need to reconfigure the pin-out of a motherboard header connector. Examples could be for your USB header, audio input header, or some other front panel connector such as the Power Button connector.

Before performing any work, please refer to your motherboard user’s manual or your motherboard manufacturer's website to confirm the pin-out needed for your connector. We strongly recommend making a notated drawing before beginning work so that you can recover if your work gets disturbed.

Front panel headers

Determine which wires you need to remove in order to rewire your plug to match the USB pin-outs on your motherboard (refer to your motherboard user’s manual). Working on one connector at a time, use a very small flathead screwdriver or similar tool to lift up on the black tab located beside the gold posts (squares). This will allow you to easily slide out the pins from the USB plug.

Working carefully so as not to damage the wires, connectors, or pins, slowly remove the pin from the connector. Repeat these steps for each wire you need to change.

Working carefully so as not to damage the wires, connectors or pins, slowly insert the pin into the correct slot of the connector then snap closed the black tab that was lifted in step 1. Repeat these steps for each wire you need to change.

20

Image 20
Contents P280 Congratulations on your purchase of the Antec P280 Table of Contents Introduction Getting to Know Your Chassis Chassis Specifications Included ScrewsBefore You Begin Hardware Installation Setting Up Motherboard InstallationInstalling the motherboard standoffs Installing Kuhler H2O Liquid Coolers Power Supply Installation External 5.25 Device Installation Internal 2.5 Device Installation Internal 3.5 / 2.5 Device InstallationPage Cable Management Front I/O Ports USB Power Switch / Reset Switch / Hard Disk Drive LED Connectors AC’97 / HD Audio PortsRewiring Motherboard Header Connections Cooling System Included Fans Optional FansInternal intake 120 mm fans Air Filters Tel +49-40-226139-22 fax +31 0 10

P280 specifications

The Antec P280 is a sophisticated mid-tower chassis that epitomizes sleek design and advanced technology, catering to PC builders who prioritize both aesthetics and functionality. Combining elegance with excellent cooling capabilities, the P280 makes it an attractive choice for gamers, content creators, and DIY enthusiasts.

One of the standout features of the Antec P280 is its robust airflow design. The chassis supports multiple cooling options, allowing users to install up to three 120mm fans at the front, two 120mm or 140mm fans at the top, and a 120mm fan at the rear, ensuring optimal airflow and keeping the internal components cool. The inclusion of dust filters on the front, top, and bottom of the case helps keep hazardous debris at bay, thus preserving performance and longevity.

The P280 boasts a minimalist modern design that emphasizes clean lines and a sophisticated appearance, available in black or white finishes. Its steel construction provides durability while the tempered glass side panel offers a glimpse into the system's internals, showcasing RGB lighting and meticulously arranged components.

Another notable feature is the spacious interior layout, which provides ample room for high-end graphics cards and CPU coolers. The case supports GPUs up to 15.5 inches and CPU coolers up to 6.5 inches in height, accommodating a wide array of components. Furthermore, the P280 can house up to five storage drives, including both SSDs and HDDs, making it versatile for different storage needs.

Cable management is a significant highlight of the P280. With several routing holes and ample space behind the motherboard tray, users can efficiently organize and conceal their cables, enhancing both airflow and aesthetics. This attention to detail reflects Antec’s commitment to a tidy build that is easy to work on.

For connectivity, the case features a user-friendly I/O panel located on the top of the front face. This panel includes USB 3.0 ports, USB 2.0 ports, and audio jacks, ensuring easy access for peripherals.

In conclusion, the Antec P280 is an outstanding chassis that harmonizes beauty with functionality. Its impressive cooling system, spacious interior, and clean design make it an ideal choice for anyone looking to build a high-performance PC in a stylish enclosure. Whether you're looking to game, create content, or simply enjoy a well-built workstation, the Antec P280 delivers on all fronts, setting a benchmark in the mid-tower chassis market.