16-Port 10/100Mbps Fast Ethernet Switch (Desktop) User Guide
If any item is missing or damaged, contact your local reseller for replacement.
Installation
The site where you install the Switch may greatly affect its performance. When installing, consider the following pointers:
•Install the Switch in a fairly cool and dry place. See Technical Specification for the acceptable operating temperature and humidity ranges.
•Install the Switch in a site free from strong electromagnetic source, vibration, dust, and direct sunlight.
•Leave at least 10cm of space at the left and right hand side of the Switch for ventilation.
•Visually inspect the DC power jack and make sure that it is fully secured to the power adapter.
External Components
This section identifies all the major external components of the switch. Both the front and rear panel is shown, followed by a description of each panel's feature.
Front Panel
Figure 1 shows the Switch’s front panel.
Figure 1. Switch Front Panel
9 | 10 11 12 13 14 15 16 |
| ||||||
|
|
|
|
|
|
| Link | ACT |
|
|
|
|
|
|
| 100 Mbps |
|
Power |
|
|
|
|
|
| Link | ACT |
|
|
|
|
|
|
| 100 Mbps |
|
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
|
AirLink+ | 9 |