AMX UDM-1604 quick start Features, Compatibility, Audio & Video Formats/Resolutions/Distance

Quick Start Guide

UDM-1604Endeleo Multi-Format Distribution Hub

Overview

The UDM-1604 4x16 Multi-Format Distribution Hub (FG-UDM-1604) delivers any video source, including Component, RGB, VGA and S-Video to a virtually unlimited number of display devices. Advanced, yet cost-effective, it distributes media over easily-installed, dedicated Cat5, 5e or 6 cable, thereby de-coupling it from the corporate backbone.

Users can quickly switch and transmit any video source to any display device, power on/off display devices, and permission user control to select and play video sources and media servers on demand.

The UDM-1604 (FIG. 1) offers four high-resolution input ports on the back of each unit. Additional Composite video inputs (RJ-45 located on the front) enable the connection of four interconnects from a TVM-1600 Managed TV Distribution Hub or four Composite video sources using approved Video over UTP extenders. In total, the UDM-1604 system can distribute any combination of the following: four RGBHV sources, four Component video sources, four S-Video sources or 12 Composite video sources.

OUTPUT Ports (RJ-45) TVM / AV Ports (RJ-45)

Input connections IR connections for locally connected devices

Serial port (RJ-12) ETHERNET port (RJ-45)

FIG. 1 UDM-1604

Features

•4 multi-format inputs (plus 4 CVBS inputs) x 16 outputs

•Digital audio support

•Central device control

•Compatible with TVM-1600

•1U rack-mounting

•Cascadable to support higher number of outputs

Compatibility

The UDM-1604 is compatible for use with the UDM-RX01 (FG-UDM-RX01) receiver.

Audio & Video Formats/Resolutions/Distance

Audio & Video Formats/Resolutions/Distance

Class	Format	Name	Distance (m)	Distance (ft.)
Composite	720x480	NTSC	700	2300
	720x756	PAL	700	2300
Component	720x480	480p	700	2300
	720x756	576p	700	2300
	1280x720	720p	200	650
	1920x1080	1080i	150	500
	1920x1080	1080p	120	400
VGA	640x480	VGA	200	650
	800x600	SVGA	200	650
	1024x768	XGA	200	650
	1280x1024	SXGA	150	500
	1600x1200	UXGA	120	400

A/V Source Input Connectors

There are 4 sets of input connectors to the rear panel of the UDM-1604, labelled A-D (see FIG. 1) that allow the UDM-1604 to connect to A/V source devices.

Connecting a VGA Video Input

1.Connect one end of a VGA cable to the source device’s VGA output port.

2.Attach the other end of the cable to the appropriate VIDEO IN connection on the UDM. For example, connect to the Video In connection on Input A of the Hub.

3.Connect any audio to the analog (RCA) audio connectors or digital (SPDIF) connector.

Note: Ensure Input A is configured as a “VGA Input” and named appropriately within the “Inputs” section of the Configuration software. Also ensure the correct Audio Type (Analog L/R or S/PDIF) is selected for the relevant input.

Connecting a Composite Video Input

1.Connect the UDM-HD15RCA3 Breakout Cable (FG-HD15RCA3, not included) to the source device’s Composite output ports:

•A1 = red RCA •A2 = green RCA •A3 = blue RCA

2.Attach the other end of the cable to the appropriate VIDEO IN connection on the UDM.

3.Connect any audio to the analog (RCA) audio connectors or digital (SPDIF) connector.

Product Specifications

UDM-1604 Specifications

Power Requirements:	90-264v AC140 W (3 PIN IEC)
Network Interface:	10baseT
Serial Interface:	9600, 8, N, 1
Max Video Input:	• 4 x RGBHV (or)
	• 4 x S-Video (or)
	• 12 x CVBS (plus)
	• 4 x Endeleo TVM-1600 or CVBS
Cascade Port:	Matrix connector for tertiary units
Electrical:	RJ-45 indicating power to receiver and link status.
Operating Environment:	• 35°F - 95°F (5°C - 35°C)
	• Max. relative humidity - 85% (non-condensing)
Dimensions (HWD):	1 3/4" x 19" x 12 1/2" (45 mm x 440 mm x 320 mm)
Weight:	8.8 lb. (4 Kg)
Certifications:	• CE/UL/FCC part 15 Class A
Included Accessories:	• IEC power cord
	• 19" mounting brackets
	• RS-232 DB-9/RJ-12 connection cable
	Note: No A/V interface cables supplied
Other AMX Equipment:	• HD15 to S-Video Cable (FG-UDM-SVID01)
	• HD15 to 3x RCA Breakout Cable (FG-HD15RCA3)
	• RS232 DB9/RJ12 Connection Cable (FG-RS01)
	• UDM-RX01 Multi-Format Receiver (FG-UDM-RX01)
	• UDM-RC10 IR Engineering Remote Control
	(FG-UDM-RC10)
	• IR01 IR Emitter Module (FG-IR01)
	• IR03 External IR Receiver Module (FG-IR03)

Connecting a Component Video Input

1.Connect the UDM-HD15RCA3 Breakout Cable (FG-HD15RCA3, not included) to the video source device’s Component video output connectors (Red, Green and Blue).

2.Attach the other end of the cable to the appropriate VIDEO IN connection on the UDM.

3.Connect any audio to the analog (RCA) audio connectors or digital (SPDIF) connector.

Connecting an S-Video Input

1.Connect the UDM-SVID01 HD-15 to SVideo cable (FG-UDM-SVID01, not included) to the video source’s S-Video connection.

2.Attach the other end of the cable to the appropriate VIDEO IN connection on the UDM.

3.Connect any audio to the analog (RCA) audio connectors or digital (SPDIF) con- nector.

Device Connectivity (IRTX Ports)

A maximum of 2 Devices such as DVD players or VCRs can be connected to the UDM Hub and controlled through the Browser software or via a remote control.

1.Connect an Endeleo IR Emitter Module (FG-IR01) to the relevant IRTX port at the rear of the Hub.

2.Run the other end of the IR Emitter to the device’s IR sensor and attach the bud to the device’s sensor by removing the cover of the reverse side of the bud.

IR commands for each device on the system have to be learned by the Hub in order to function properly. Refer to the Protocols and IR section of the UDM-1604 Operation/ Reference Guide on how to learn a device’s IR commands.

IR Receiver (IRRX) Port

The IR RX port has two purposes:

•It is used for devices utilizing Passthrough Mode. •Also used for learning and creating new IR protocols.

Refer to the UDM-1604 Operation/Reference Guide for details.