D-Link Gigabit Switch, DES-1250G manual Logout, Reset Setting

Page 23

To restore a current setting file to the device, you must specify the backup file and press the “Restore” button to process the setting of the recorded file.

Figure 28. Backup Setting

Note: When restoring a recorded file, the current password will not be erased.

Reset Setting

The Factory Reset button helps you to reset the device back to the default setting from the factory. Be aware that the entire configuration will be reset; the IP address of the device will be set to the default setting of 192.168.0.1.

Figure 29. Reset Setting

Logout

When you use this function, the Web configuration will logout and return to the first Login page.

Figure 30. Logout

Page 22 Page 24
Image 23
Page 22 Page 24
Contents
Manual Page Vcci Warning WarnungPage About this Guide PurposeTerms/Usage Introduction Switching TechnologyGigabit Ethernet Technology Fast Ethernet TechnologyVlan Virtual Local Area Network Features Unpacking InstallationConnecting Network Cable Unpacking and InstallationAC Power Identifying External Components Front PanelRear Panel Ports 49~50 Gigabit Status LEDs Power and System LEDsUnderstanding LED Indicators Ports 1~48 10/100M Status LEDsPorts 49~ 50 mini-GBIC Status LEDs Discovery List Installing the Web Management UtilityConfiguration Monitor List Device SettingToolbar Factory default password is adminLogin Configuring the SwitchPort Settings Setup MenuConfiguring Setup Setting Vlan Settings Virtual Local Area Network Port ConfigurationMirror Setting Trunk SettingStatistic Device StatusBackup Setting System SettingTrap Setting Set PasswordLogout Reset SettingGeneral Technical SpecificationsPage Page Product Registration International Offices