D-Link DSS-5 manual LED Indicators, Auto-MDI Jacks

its power adapter into a power outlet will immediately power it on.

Auto-MDI Jacks:

These jacks supports automatic MDI/MDIX crossover detection function gives true ‘plug and play’ capability without the need of confusing crossover cables or crossover ports.

With the Auto-MDI function, you just need to plug-in the network cable to the hub directly and no need to care if the end node is NIC (Network Interface Card) or switches and hubs.

LED Indicators

Power Indicator (PWR)

This LED indicator lights green when the hub is receiving power, otherwise, it is off

Link/Act:

This indicator light green when the port is connected to a station, if the indicator blinking will be transmitting or received data on the network.

100M:

If this indicator light green, mean this port is connected to a 100M Fast Ethernet station. Otherwise, this indicators reminds off, mean this port is connected to a 10M Ethernet station.

FDX/COL:

This LED indicator light green when a respective port is in full duplex (FDX) mode. Otherwise, it is blinking when collisions are occurring on the respective port

7