Installation Guide
Solecis AVS-SL-PR-0201-0301
Overview
The Solecis
(front)
(rear)
FIG. 1 Solecis AVS-SL-PR-0201-0301 Presentation Switcher
The AVS-SL-PR-0201-0301 features a total of 5 AV inputs and a programmable serial output for controlling projectors, plasma and LCD displays.
There are 2 wide-band (250MHz -3dB) computer inputs on HD-15 connectors, 3 video inputs each of which can be either composite or YC. 5 stereo audio follow-video/ computer inputs on RCA/Captive-Wire connectors each with independent volume control and preset input attenuation which is retained within the non-volatile memory of the AVS-SL-PR-0201-0301.
Full video and audio breakaway is available with RS232 control along with a master volume control for total flexibility. Regardless of the video input type (CV or YC), both CV and YC outputs are available simultaneously which allows mixed format inputs to be displayed without switching.
The AVS-SL-PR-0201-0301 also supports a balanced microphone (with phantom power if required) for which the gain and tone can easily be adjusted from the PC based setup software. The microphone input can be mixed onto the switched audio output and is then presented on a balanced mixed output.
Control of the AVS-SL-PR-0201-0301 can be from the front panel or by RS232 control from a computer or AV control system. The programmable serial output will control power on and off and switch the inputs of the projector or display. It is easily programmed using the Solecis Device Configuration Software which includes a library of common display devices to reduce installation time.
Projector control includes programmable RS232 commands for Power ON/OFF, RGB, YC and CV inputs and when supported, the devices power status is interrogated and displayed on the front panel.
Product Specifications
AVS-SL-PR-0201-0301 Specifications
RGB
RGB Inputs: | 2 |
|
|
Connector: | |
|
|
Level: | Analog |
|
|
Max Level: | 1V |
|
|
Impedance: | 75 ohm |
|
|
Bandwidth | 250MHz |
|
|
Return Loss | |
|
|
Adjacent Input Crosstalk: | |
|
|
Sync Input |
|
|
|
Level: | TTL / Analog |
|
|
Max Level: | 5V |
|
|
Impedance: | 75 ohm |
|
|
Video Input |
|
|
|
Number: | 3 |
|
|
Connectors: | RCA & 4 pin mini din |
|
|
Type: | CV or YC |
|
|
Bandwidth: | 50 MHz |
|
|
Differential Phase Error: | 0.05% |
|
|
Differential Gain Error: | 0.03% |
|
|
Crosstalk: | |
|
|
Audio Input
Number: | 6 |
|
|
Level: | Analog |
|
|
Connector: | RCA |
|
|
Type: | Unbalanced analog |
|
|
Max Level | 2V |
|
|
Impedance | 47K ohm |
|
|
Audio Response | 20Hz - 50KHz |
|
|
Microphone | Balanced / Unbalanced |
|
|
Phantom Power | 12V internal / 48V max external |
|
|
RGB Output |
|
|
|
Number: | 2 |
|
|
Connector: | |
|
|
Level: | Analog |
|
|
Gain: | Unity |
|
|
Sync | Output |
|
|
Impedance: | 75 ohm |
|
|
Sync Level: | TTL |
|
|
Sync Impedance: | 75 ohm |
|
|
Video Output |
|
|
|
Number | 1 |
|
|
Connectors | One RCA for Composite and one 4 pin mini din |
|
|
Audio Output |
|
|
|
Connector | RCA & |
|
|
Switched | 1 unbalanced with volume control |
|
|
Mixed | 1 balanced / unbalanced |
|
|
Impedance | 600 ohm |
|
|
Power: | • |
| • Power Connector: IEC |
|
|
Power Consumption: | 15W |
|
|
Dimensions (HWD): | 44 x 441 x 174 |
|
|
Weight: | 1.4kg |
|
|
Included Accessories: | 1U Rack mounting kit |
|
|
Certifications: | • CE |
| • UL60950 |
| • FCC class B, part 15 |
| • RoHS/WEEE compliant |
|
|
Safety Instructions
Please read these instructions before using your AMX Solecis device. Failure to comply with these instructions could result in fire, electrical shock, personal injury, death, or damage to the equipment.
Power Source
Use only a
Power Cord
Use only the cord shipped with the unit. Do not use the cord if it has become damaged or frayed. Contact your AMX Solecis dealer if you need to replace the power cord.
Grounding
The interface is grounded through the grounding conductor on the power cord. To avoid electric shock plug the power cord into a properly wired receptacle. Do not defeat the purpose of the
Fuse
For protection against the risk of fire, use only a fuse of the same rating and type.
Liquid Spills
Do not set drinks on top of the unit or immerse the unit in liquid.
Do Not Disassemble
This device contains no user serviceable parts. All servicing must be performed by a qualified service technician.
For Safety Reasons
•Do not place the unit on an unstable surface.
•Do not use near water or sources of heat.
•Use only recommended attachments.
•Use the type of power supply as specified.