1000BASE-T Twisted Pair Ports (Port 25~26)
The DES-1026G is equipped with two Gigabit twisted pair ports that are auto negotiable 10/100/1000Mbps and also support auto MDI/MDIX crossover detection. These two ports can operate in half- and full- duplex modes.
Rear Panel
AC Power Connector
This is a three-pronged connector that supports the power cord. Plug in the female connector of the provided power cord into this connector, and the male into a power outlet. Supported input voltages range from 100~240V AC at 50~60Hz.
3.Installation
The site where you place the DES-1026G may greatly affect its performance. When installing, take the following into your consideration:
Install the DES-1026G in a fairly cool and dry place. See Technical Specifications for the acceptable temperature and humidity operating ranges.
Install the DES-1026G in a site free from strong electromagnetic field generators (such as motors), vibration, dust, and direct exposure to sunlight.
Leave at least 10cm (about 4 inches) of space at the front and rear of the hub for ventilation.
8
