Eton FR400 Initial Setup, Power Sources, Charging the Battery Pack, AA Battery Operation

American Red Cross FR400 OWNER’S MANUAL

INITIAL SETUP

1.Open the compartment; it slides downward with firm pressure at center of hinge.

2.Connect the battery pack.

POWER SOURCES

1.Rechargeable battery pack (included).

2.3 AA batteries (not included).

3.AC adapter/charger (included).

4.Continually turning the crank, even with no batteries installed.

CHARGING THE BATTERY PACK

1.Switch the BATTERY/DYNAMO-ADAPTER/OFF switch to the OFF position.

2.Turn the dynamo-crank clockwise or counter-clockwise about 2 turns per second for 90 seconds.

3.After charging, select the DYNAMO-ADAPTOR position for power.

While charging, the red LED charging light illuminates.

AA BATTERY OPERATION

1.Open the battery compartment.

2.Install 3 AA batteries, observing polarity diagram.

3.For power, set the power selector switch to the BATTERY position.

6