Installing Your SP107-101/101C, Operation

DESIGNER SOLUTIONS

INSTALLING YOUR SP107-101/101C

Step 1. Cut an opening into the furniture’s surface.

Note: The furniture can be 3” or less in thickness. Always confirm dimensions before cutting to insure that specifications have not changed.

Step 2. Insert the SP107-101/101Cinto the table cutout.

Step 3. Refer to Diagram 3 and from underneath the furniture surface, attach the mounting brackets to the 6-32 studs on the bottom side of the SP107-101/101Cusing the screws provided.

NOTE: If the surface is too thick for the screws provided, longer 6-32 screws can be used.

Step 4. Secure the audio/video cables by using cable clamps, tie wraps, or other standard mounting hardware. Pass the power cord from the bottom of the housing and attach it to the furniture separately from the audio/video cables.

Step 5. Connect the appropriate cables with the correct input connectors on the bottom of the unit.

Step 6. The SP107-101/101C is now operational.

OPERATION

The SP107-101/101Crequires no adjustments for performance. Once set-up, the SP107-101/101Cwill work trouble-free without user intervention.

Connect external devices to the appropriate connector on the SP107-101/101C.

TROUBLESHOOTING GUIDE

The SP107-101/101Csupplied was carefully tested and no problems were detected. However, we would like to offer the following suggestions:

∙Please make sure that the highest quality network cables are used.

∙Make sure that no cable or power cord is damaged or pinched. If there has been damage, do not use the SP107-101/101C.Please call the ALTINEX Customer Service Department at (714) 990-2300 to have the unit repaired.

ALTINEX POLICIES

9.1 LIMITED WARRANTY/RETURN POLICIES

Please see the ALTINEX website at www.altinex.com for details on warranty and return policies.

9.2CONTACT INFORMATION ALTINEX, Inc.

592 Apollo Street

Brea, CA 92821 USA

TEL: 714 990-2300

TOLL FREE: 1-800-ALTINEX

WEB: www.altinex.com

E-MAIL:solutions@altinex.com

400-0520-001