Installing Your SW104-130, Operation

SWITCHER

INSTALLING YOUR SW104-130

Step 1. Make sure to use the ALTINEX power adapter supplied with the unit. Connect the power adapter to the power port. The Power and Input 2 LEDs should turn on.

NOTE: Input 2 is the default if there is no signal on Input 1 and the Control Switch is in the Auto position.

Step 2. Connect a video and audio source to Input 1. If there is a properly formatted input signal on Input 1, the switcher will switch to Input 1 automatically, and the Input 1 LED will turn on.

Step 3. Connect a video and audio source to Input 2. If there is a properly formatted input signal on Input 1, the switcher will remain on Input 1.

Step 4. Connect the local video and audio outputs to the local monitor and speakers.

Step 5. If a remote switch is to be used, connect the control cable to the Input Select port. See Section 7 for operation control.

Step 6. Verify that the picture quality on the display is good. If a signal is not being received, make sure that the display is compatible with the resolution of the computer graphics card.

Step 7. Connect the 4TP Main Output to the input of the Twisted Pair receiver.

NOTE: Connect the Twisted Pair receiver per its instructions.

Step 8. The SW104-130is now ready for operation. Depending on the length of the cable, the video equalization adjustment may need to be adjusted for optimal performance.

OPERATION

The SW104-130requires only one adjustment to be made for optimal performance. The adjustment is video equalization for long cable lengths. The remaining controls are for input selection only.

7.1 VIDEO EQUALIZATION

Video equalization is provided to fine-tune the displayed image on the remote display. The equalization adjustments on the SW104-130and Twisted Pair receiver work together.

Start by setting both units to minimum and then increase slowly. Some monitors respond very quickly to changes in the equalization, others may not display an image until the equalization is set precisely.

7.2 SWITCH MODES

7.1.1 AUTO-SWITCH MODE

In auto-switch mode, the SW104-130automatically selects Input 2 if no active signal is present on Input 1. If a signal is on Input 2 and not on Input 1, the SW104-130will maintain Input 2. However, when an active signal is applied to Input 1, the SW104-130will switch to Input 1. If active signals are on both inputs, the SW104-130will automatically switch to Input 1.

7.1.2 MANUAL-SWITCH MODE

The SW104-130control switch allows switching between Input 1 and Input 2. Placing the control switch in either the Input 1 or Input 2 position forces the source signal to the main and local outputs thereby disabling auto-switching.

7.1.3 REMOTE SWITCH MODE

Remote switching is achieved via a contact closure on the Input Select jack. Remote switching mode disables both auto-switching and the Control Switch position. A closed contact selects Input 1 and an open contact selects Input 2.

400-0426-006

SW104-130 specifications

The Altinex SW104-130 is an advanced 4 x 1 switcher designed for various audio-visual applications, offering robust performance and user-friendly features. This device is engineered to streamline the connection of multiple video sources to a single display, making it ideal for educational institutions, corporate environments, and event venues where flexibility and efficiency are paramount.

One of the main features of the SW104-130 is its ability to handle a variety of video formats. This switcher supports high-definition resolutions up to 1080p, ensuring that users can enjoy crisp, clear images regardless of the source. This versatility is crucial in environments where different devices, such as laptops, Blu-ray players, and cameras, may be connected.

The SW104-130 utilizes cutting-edge switching technology to provide fast and seamless transitions between sources. Users can switch inputs easily via the front panel buttons or remote control, ensuring that presentations run smoothly without interruptions. This is particularly beneficial in professional settings, where time is of the essence and the need for reliability is critical.

Additionally, the SW104-130 features automatic input switching capabilities. This technology automatically detects and switches to the most recent source connected, minimizing the need for manual intervention and allowing presenters to focus on their content rather than the technology. The intelligent design of this device greatly enhances the user experience, making it an excellent choice for those who prioritize efficiency.

The unit is built with a sturdy chassis, ensuring durability and long-term performance even in high-traffic areas. Its compact size allows for easy integration into existing AV setups, whether it's in a rack system or tabletop configuration. Furthermore, its user-friendly interface facilitates seamless operation, catering to both tech-savvy users and those less familiar with AV technology.

In terms of connectivity, the SW104-130 features multiple HDMI inputs, ensuring compatibility with a range of modern devices. The inclusion of audio switching capabilities further enhances its functionality, allowing for a complete multimedia experience.

In summary, the Altinex SW104-130 stands out as a reliable and feature-rich video switcher that meets the demands of various AV applications. Its combination of high-definition support, automatic switching, and robust construction make it a valuable asset for any professional setting, ensuring that users can deliver high-quality presentations and content with ease.