Installing Your MT107-203, Operation, No Display

MULTITASKER

INSTALLING YOUR MT107-203

Step 1. Turn off power to the MultiTasker enclosure and remove the input AC power cord.

Step 2. Locate the MT107-104 currently installed in the MultiTasker. Verify there is an empty slot in the enclosure for the new MT107-203card.

The empty slot must be directly to the left of the MT107-104 Matrix Engine. For example, if the engine is installed in slot 8, the input card should be installed in the first empty slot number less than 8.

Step 3. Route the ribbon cables through the notch in the add-on boards and connect to the MT107-104 base assembly using the special high-bandwidth cables provided with the engine. Make sure the cable connector is secured in the socket of the input connector card.

Step 4. Attach the opposite end of the ribbon cable to the card and carefully slide the MT107-203into the empty slot in the MultiTasker enclosure.

Step 5. Secure the card by tightening the retainer screws at the top and bottom.

Step 6. Connect the output of a Twisted Pair transmitter to the inputs of the MT107-203using ALTINEX’s special cable part number MS8704TP.

Step 7. Restore AC power to the enclosure.

Step 8. The MT107-203is now ready for operation.

OPERATION

7.1 RS-232 CONTROL

The MT107-203has many advanced remote-control capabilities as part of an MT107-104 Matrix Switcher. These capabilities are accessible through standard RS-232 communication. The actual controlling can be accomplished through a computer control system or any other device capable of sending RS-232 commands.

7.2 DESCRIPTION OF COMMANDS

Please see the MT107-104 User's Guide for a full listing of commands available for the MT107-203as part of a MultiTasker Matrix Switcher.

TROUBLESHOOTING GUIDE

We have carefully tested and found no problems in the supplied MT107-203.However, we would like to offer suggestions for the following:

8.1 NO DISPLAY

Cause 1: The source has a problem.

Solution: Check the source and make sure that there is a signal present and all source connections are correct. If the source is working and there is still no display, see Cause 2.

Cause 2: The input signal is not detected.

Solution 1: In AVSnap®, or other control software, send the [SDI] command. This command is detailed in the MT107-104 User’s Guide. Verify a signal is detected for the input number in question. If a signal is not detected, see Solution 2.

Solution 2: Verify the MT107-203is connected to the MT107-104 and that the cable is in good condition. If a signal is detected, see Cause 3. If there is no signal detected, please call ALTINEX at (714) 990-2300.

400-0371-004

MT107-203 specifications

The Altinex MT107-203 is an advanced audio-visual system designed to address the diverse needs of modern presentation environments. It combines cutting-edge technology with versatile features to ensure seamless integration and reliable performance during meetings, conferences, and educational settings.

One of the main features of the MT107-203 is its comprehensive connectivity options. Designed to accommodate a variety of devices, it includes multiple HDMI inputs, VGA ports, and audio jacks, allowing users to connect laptops, desktop computers, and other multimedia sources with ease. This extensive compatibility ensures that users can quickly set up their devices without the hassle of searching for the right connectors.

In terms of control, the MT107-203 offers intuitive operation through its user-friendly interface. The system is equipped with a backlit keypad that simplifies navigation and allows users to switch between inputs or adjust settings effortlessly, even in low-light environments. Additionally, its customizable settings enable users to tailor the system to their specific preferences, enhancing overall user experience.

The MT107-203 also incorporates sophisticated signal processing technologies that enhance audio and video quality. With support for high-definition resolutions, it delivers crisp visuals that captivate audiences. The advanced audio processing capabilities ensure that sound is clear and evenly distributed throughout the room, creating an immersive experience for every participant.

Another noteworthy characteristic of the Altinex MT107-203 is its compact and sleek design. Measuring just a few inches in height and width, it can fit seamlessly into various types of furniture, making it ideal for small to medium conference rooms and classrooms. Its compact form factor does not compromise functionality, as it retains robust performance and reliability.

Security is also a priority with the MT107-203. It features built-in protection mechanisms that safeguard connected devices from power surges and overheating. This not only helps to prolong the lifespan of both the system and connected equipment but also provides peace of mind to users during critical presentations.

In summary, the Altinex MT107-203 is an exceptional choice for anyone seeking a reliable, user-friendly audio-visual solution. With its extensive connectivity, intuitive controls, high-quality signal processing, compact design, and built-in security features, this system is well-equipped to meet the dynamic needs of modern presentation environments. Whether in a corporate boardroom or an educational facility, the MT107-203 delivers unparalleled performance and convenience.