Aluratek AHDURS350F manual Setup Hard Drive Rfid and Encryption

Page 10

Setup Hard Drive RFID and Encryption

1.Please connect AHDURS350F external drive to the computer with the enclosed USB cable; the operating system will detect the device automatically.

2.AHDURS350F will give off three-short and one-long sound and the LED indicator will ﬂash in red.

3.Place/swipe one of the RFID sensor keys on the logo on the enclosure. The key is associated with the enclosure when you hear a beep from the enclosure and the LED indicator will ﬂash in green.

4.Remove the key away from the logo.

5.Repeat steps 3 and 4 for the 2nd RFID sensor key within 3 minutes of step 4 or you will need to start the key association process for both keys again.

Note: You may replace a full hard drive with a new drive for more secure storage. AHDURS350F supports RFID security up to three different hard drives at a time. The enclosure will give a constant beep sound when you try to initiate the key association with the fourth drive. You may however use the drive as a regular external hard drive.

11

Image 10

Contents Instructional Manual Table of Contents Introduction Features Features and RequirementsRequirements Package Contents Rfid External Hard Drive Highlights LEDHardware Installation for Enclosure purchase only StepHardware Installation for Enclosure purchase only Hardware Installation for Enclosure purchase only Setup Hard Drive Rfid and Encryption Partitioning and Formatting for PC Click OK to continue Click Next to continue Setup Hard Drive Rfid and Encryption Please select Perform a quick format Setup Hard Drive Rfid and Encryption Partitioning and Formatting for MAC Setup Hard Drive Rfid and Encryption How to use the Rfid drive To remove the encryption from the hard driveToll free Technical SupportRadio and TV Interference Statement Warranty Aluratek.com Manuel d’Instructions Table des matières Introduction Caractéristiques Caractéristiques et ExigencesExigences Contenu Caractéristiques du disque Rfid dur de 3,5 po Clé Rfid Détecteur RfidÉtape Étape Étape Conﬁguration de l’IRF du disque dur et de l’encryption Conﬁguration de l’IRF du disque dur et de l’encryption suite Partitionnement et formatage PCCliquez sur OK Cliquez sur Next Conﬁguration de l’IRF du disque dur et de l’encryption suite Veuillez sélectionner « Perform a quick Conﬁguration de l’IRF du disque dur et de l’encryption suite Partitionnement et formatage MAC Conﬁguration de l’IRF du disque dur et de l’encryption suite Comment utiliser du disque Pour retirer l’encryption du disque durCourriel support@aluratek.com Soutien techniqueÉnoncé d’interférence avec la réception radio et télévisée Garantie Aluratek.com