Allied Telesis X610, X510 manual SwitchBlade x8112 key features

Page 5

SwitchBlade x8112 key features

Dual CFCs are partnered with 10 line card slots

80Gbps non-blocking throughput to each line card slot

Active-Active switching fabric utilizes all available system bandwidth, and fast failover is provided with the second control card in hot-standby.

Supports IEEE 802.3at PoE+ (30W): two additional PoE PSUs can be installed to maximize power available to connected devices

Designed to reduce power consumption (high efficiency power supplies and low power chip sets) and minimize hazardous waste

An ECO-Switch button on the front panel allows conservation of additional power by turning off all diagnostic LED indicators when they are not required

For information about the AlliedWare Plus features on SwitchBlade x8112, see the AlliedWare Plus Software Reference for SwitchBlade x8100 Series Switches.

SwitchBlade x8112 Controller Fabric Card (CFC)

SBx81CFC400 controller fabric card provides 40Gbps bandwidth per line card slot (80 Gbps with 2 control cards)

80Gbps x 10 line card slots = 800Gbps per system

RS-232 and Ethernet management port for out of band management

USB connector for external file transfer and storage

Centralised LEDs provide status of all 12 card slots, CFC, PSU, fan tray

SwitchBlade x8112 Line Cards

SBx81GT24 Line Card with 24 x 10/100/1000T ports

SBx81GP24 Line Card with 24 x 10/100/1000T PoE+ ports

SBx81GS24a Line Card with 24 x 100/1000 SFP ports

SBx81XS6 Line Card with 6 x 10Gbps SFP+ ports

PSUs and Fan Tray

The switch uses high efficiency power supplies. Each power supply can be fed from a separate power source to increase reliability.

SBxPWRSYS1 (1200W AC System Power Supply)

The switch operates with one system PSU, and installing a second loadsharing PSU provides ultimate redundancy.

SBxPWRPOE1 (1200W AC PoE Power Supply)

Two PoE PSUs can be installed to maximize power available to connected devices.

SBxFAN12 (Fan tray for 12 slot chassis)

The PSUs and the fan tray are all hot-swappable to maximise uptime during maintenance or reconfiguration.

For more information about the hardware, see the SwitchBlade x8112 Installation Guide. These documents are available from our website at www.alliedtelesis.com/switches/ sbx8112.

C613-10508-01-REV B

Software Release Note AlliedWare Plus Version 5.4.3-0.1

5

Image 5
Contents AlliedWare Plus Version ContentsIntroduction Acknowledgements Hardware Support Support for x510 Series SwitchesSwitchBlade x8112 key features Support for XEM-12Tv2 and XEM-12Sv2 modules IPv6 Enhancements New Features and EnhancementsSlaac IPv6 LicensingImportant Considerations Before Upgrading to this Version MLD Changes in this VersionVrrp Y Y Dhcp Show counter ipv6 dhcp-clientNo channel-group command has Ospf MribShow ip ospf Modified Show ipv6 ospf Modified Summary New Ipv6 pim crp New PIM-SMv6 Cisco-prefix Ipv6 pim rp New PIM-SMv6 Embedded Snmp Spanning Tree Vlan VRRP-MIB Installing this Software Version Awplusconfig# ip route 0.0.0.0/0 gateway-address Installing the GUISD card use the command Software Release Note AlliedWare Plus Version

X510, X610 specifications

Allied Telesis has long been a key player in the networking industry, and their X610 and X510 series switches underscore this reputation with robust features aimed at businesses of all sizes. Designed to meet the demands of enterprise networks, these switches emphasize performance, flexibility, and ease of management.

The Allied Telesis X610 series is a high-performance layer 3 managed switch designed for core or aggregation layer deployments. With options for 24 or 48 gigabit Ethernet ports and multiple 10 Gigabit SFP+ uplinks, the X610 ensures high throughput and reduced latency, making it ideal for bandwidth-intensive applications. The architecture supports advanced routing features, including IPv4 and IPv6 static routing, OSPF, and RIP, which enable seamless integration into an existing network infrastructure.

In contrast, the X510 series offers cost-effective solutions that do not compromise on performance. This series also provides layer 2 and layer 3 capabilities, making it suitable for both edge and aggregation layer deployments. Available with 24 or 48 gigabit Ethernet ports and optional SFP+ uplinks, the X510 can efficiently handle high volumes of network traffic while offering a variety of quality-of-service (QoS) features to prioritize critical applications.

Both the X610 and X510 incorporate the Allied Telesis management tool, AT-View, allowing for intuitive web-based management of network devices. This feature simplifies the configuration process and reduces operational overhead for IT teams. Moreover, the switches include support for SNMP and RMON, facilitating comprehensive monitoring and reporting.

Security is paramount in today's networking environment, and both series offer robust features. The switches support MAC address filtering, IEEE 802.1X port-based authentication, and access control lists (ACLs), ensuring that only authorized users and devices can access the network. Additionally, advanced security protocols help protect against common network threats.

The Allied Telesis X610 and X510 also support Energy Efficient Ethernet (EEE), contributing to reduced power consumption and aligning with green IT initiatives. This is complemented by fan-less designs for the X510 series switches, which offer silent operation, making them suitable for deployment in office environments.

In summary, the Allied Telesis X610 and X510 series switches stand out for their performance, versatility, and security features. They are designed to meet the needs of modern enterprises seeking reliable and scalable networking solutions. Whether used for core switching or as edge devices, these products offer a blend of advanced technology to support a range of networking applications efficiently.