Technicolor - Thomson DPL560HT Test Tone / Channel balance, Connecting for Power, Factory Setting

Page 12

DPL560-EN 4/11/02 5:27 PM Page 13

Getting Started

Test Tone / Channel balance

Channel balance

Your receiver is equipped with a test signal generator for balancing the channels. As the signal "travels" from channel to channel, press LEVEL key to adjust corresponding channel and adjust by rotating the volume knob until all channels are at the same loud- ness level.

Connecting for Power

Make sure you connect all your other electronic com-

EN

ponents and the

 

speakers before plug-

 

ging your receiver

 

into the outlet. Plug

 

the power cord in

 

the wall outlet,

 

matching the wide

 

blade of the plug with the wide slot in the outlet. Be

 

sure to insert the plug completely.

 

Courtesy Dolby Laboratories

Level adjustment & surround channel level expec- tation

Even though you adjust the surround channel to be as loud as the others on the test signal, you'll find that on actual program material the surround chan- nel is usually much lower than the front. Don't be tempted to readjust the surround level; program pro- ducers use surround mostly for subtle atmosphereics and ambience, and only rarely for special effects. A good surround mix doesn't call attention to itself; if it did, it would soon become distracting.

N O T E

The system is equipped with Dolby Digital, and manufactured under License from Dolby Laboratories.

N O T E

All preset radio stations and surround sound setting will be lost after factory setting is restored. You may restore factory setting with the following procedures:

1.Enter Standby mode

2.Press SURR. MODE key when holding SOURCE UP.

3.All preset stations will reset to FM87.5MHz and all receiver settings restore to default settings as described above.

Using Headphones

To listen privately through your audio system, use the PHONES jack

on the receiver. However, make sure you turn down the volume before you put on the head- phones. Increase the volume to the desired level after headphones are in place.

Once headphones are connected, “HEADPHONE DOWNMIX” will scroll on display. This feature auto- matically converts multi-channel speaker outputs to 2 channel stereo for your listening pleasure.

Hearing Comfort & Well-Being

•Do not play your headset at a high volume. Hearing experts advise against continuous extended play.

•If you experience a ringing in your ears, reduce volume or discontinue use.

Factory Setting

The DPL560 is preset to the following settings when you first power the receiver up right out of the box: Function = Tuner

Volume setting = 45 Bass & treble = 0 dB

Speaker settings: Center, rear, front = small Subwoofer = on

Manufactured under License from Digital Theater Systems, Inc. US Pat. No.

5,451,942 and other world wide patents issued and pending. “DTS Digital

Surround”, are trademarks of Digital Theater Systems, Inc. copyright 1996 Digital Theater Systems, Inc. All Rights Teserved.

Dolby Digital Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the

double-D symbol are trademarks of Dolby Laboratories. Copyright 1992-1997 Dolby Laboratories, Inc. All Rights Reserved.

9

Page 11 Page 13
Image 12
Page 11 Page 13
Contents France RCS nanterre B322 019 464 DPL560 Safety Information For UK OnlyTable of Content Getting Started Unpacking the ReceiverInserting Batteries into Remote Control Unpacking The SpeakersProtect your Components from Overheating Connecting to Audio-Visual Components Digital ConnectionConnecting the Antennas Digital ConnectionsAM Loop Antenna and FM Indoor Antenna Connecting the Speakers Connecting the SubwooferSpeaker wires Speaker PolarityPositioning your speaker Preferred surround placement Connecting for Power Using HeadphonesFactory Setting Test Tone / Channel balanceOperating Your Receiver Receiver ControlsYour Remote Control ON/OFFDisplay KHz MHzSwitching on/off Selection of Audio/Video source Operating Your ReceiverDVD Using the receiver to play a source Playing a DVD with the receiverManual tuning Operating the RadioManual preset Storing radio stationsRDS Radio Data System for FM Only Search Station by Program TypeAdvanced Sound Control Sound Enhancement SystemsFine Setting of the Components StereoDSP Digital Sound Processor Digital InputFine Setting of the Speakers Advanced SettingFactory defaulted Advance setting indication from VFD Speaker ConfigurationsAdvance Sound Control Speaker IconsDisplaying Program Formats Troubleshooting tips Troubleshooting TipsEquipment Specifications Care and Maintenance

DPL560HT specifications

The Technicolor - Thomson DPL560HT is a state-of-the-art digital projector that stands out in the realm of home cinema technology. Designed for both enthusiasts and professionals, the DPL560HT combines exceptional image quality, advanced features, and user-friendly capabilities to provide a rich viewing experience.

One of the standout features of the DPL560HT is its DLP (Digital Light Processing) technology. This technology enables sharp and vibrant images with enhanced color accuracy and contrast. By utilizing a digital micromirror device (DMD), the projector can deliver over 1,000,000 distinct pixels, ensuring a detailed and clear projection suitable for a range of content, from movies to presentations.

The projector boasts a high resolution of 1920x1080 pixels, supporting full HD content. This ensures that audiences experience cinema-quality visuals right in their living rooms. Additionally, the DPL560HT features a high brightness rating of up to 3000 ANSI lumens, making it ideal for use in different ambient lighting conditions. Whether in a dimly lit room or a well-lit space, users can rely on consistent image quality.

Color performance is another highlight of the DPL560HT. It supports a wide color gamut, allowing for more vivid colors and better overall picture quality. The projector also incorporates advanced color correction features, ensuring that hues appear rich and lifelike. This is particularly beneficial for movie lovers who seek to replicate the theatrical experience at home.

The DPL560HT also emphasizes versatility and connectivity. It includes various ports, such as HDMI, VGA, and AV inputs, making it compatible with multiple devices, including Blu-ray players, gaming consoles, and laptops. Wireless connectivity options further enhance its usability, allowing users to project content directly from tablets or smartphones without the hassle of cables.

Moreover, the projector's compact design and lightweight construction make it easily portable. This is advantageous for users who attend outdoor movie nights or business presentations. The DPL560HT is equipped with a durable lamp that has a long lifespan, reducing the need for frequent replacements and maintenance.

In summary, the Technicolor - Thomson DPL560HT projector seamlessly combines innovative technologies and user-centric features. With its high resolution, impressive brightness, accurate color rendering, and versatile connectivity options, it is an exemplary choice for those seeking to elevate their entertainment or presentation experiences. Whether for home use or professional applications, the DPL560HT stands out as a solid investment in digital projection technology.
Top Page Image Contents