Patch | 3 |
PCR: 02401 | Module: IPV6 | Network affecting: No |
Neighbour discovery and PIM6 caused a fatal error when IPv6 was not enabled, or when the IPv6 feature license was not present. This issue has been resolved.
PCR: 02406 | Module: IPV6 | Network affecting: No |
A
INTERFACE command now works correctly.
PCR: 02407 | Module: IPG | Network affecting: No |
ICMP was sending too many messages back as responses to fragmented packets. This issue has been resolved.
PCR: 02409 | Module: IPG | Network affecting: No |
A warning now appears when the DELETE IP INTERFACE command is executed before the DELETE DVMRP INTERFACE command.
PCR: 02410 | Module: VRRP | Network affecting: No |
VRRP
PCR: 02413 | Module: IPG, IPX2 | Network affecting: No |
Static IP ARP entries could not be added to hardware at boot time. Also, an IPX circuit could not be deleted from hardware. These issues have been resolved.
PCR: 02416 | Module: DVMRP, IPG | Network affecting: No |
Multicasting forwarding was not working correctly. This issue has been resolved.
PCR: 02417 | Module: VLAN, IPG | Network affecting: No |
The IGMP port list was not updating correctly when a port went down. This issue has been resolved.
PCR: 02418 | Module: IPV6 | Network affecting: No |
ICMPv6 was returning an error for
PCR: 02415 | Module: IPG | Network affecting: No |
Packets with a RIP source address and next hop address that are not on the same subnet as the interface will now be processed. If the received next hop is not on the same subnet, it is treated as 0.0.0.0.
PCR: 02420 | Module: SWI | Network affecting: No |
On GBICs, the link was forced up when the transmit fibre was removed. Once up, the link could not be taken down again by removing the transmit fibre. This issue has been resolved.
Patch