Allied Telesis PN 613, AT-S63 instruction

AT-S63 Version 3.1.0 Patch 1 Software Release Notes

activated if the ambient temperature exceeds 60° Celsius for five minutes, sends another SNMP trap, logs an error event message, and activates the Fault LED on the front panel.

Version 1.3.0:

Added the following new features to 802.1x port-based network access control:

—Guest VLANs

—VLAN Assignment and Secure VLAN features for supporting dynamic VLAN assignments with supplicant accounts.

—MAC address-based authentication as an alternative to 802.1x username and password authentication.

Simplified the menu interface for managing the access control entries in the Management ACL.

Version 1.2.0:

MLD snooping for MLDv1 and MLDv2.

802.1x port-based network access control supports up to 20 supplicants simultaneously on an authenticator port.

Quality of Service has the following new actions:

—Set Type of Service (ToS)

—Move Type of Service to 802.1p Priority

—Move 802.1p Priority to Type of Service

—Send to Mirror Port

The command line interface has new command parameters for displaying and deleting specific types of MAC addresses from the MAC address table.

Version 1.1.0:

LACP (802.3ad)

Policy-based QoS (Classifiers, Flow Groups, Traffic Classes, and Policies)

Flash memory operations

Access Control Lists (ACLs)

Syslog support

Password reset

Redundant power supply information

IGMP v3 Snooping

New web browser interface procedures

Version 1.0.0:

Auto-Negotiation (IEEE 803.3u-compliant) for speed and duplex mode

Auto and manual MDI/MDI-X

Flow control (IEEE 802.3x and 802.3z-compliant)

Head of line blocking prevention

Unicast, multicast, and broadcast rate control

Port mirroring

PN 613-000915 Rev A

Allied Telesis, Inc.