Allied Telesis AT-FS750/16, AT-FS750/24 manual Cabling the Switch

Page 37

AT-FS750/16 and AT-FS750/24 Fast Ethernet Smart Switches Installation Guide

Cabling the Switch

Observe the following guidelines when connecting twisted pair and fiber optic cables to the ports on the switch:

ˆThe connector on the cable should fit snugly into the port on the switch. The tab on the connector should lock the connector into place.

ˆBecause the twisted pair ports have auto-MDI/MDI-X, you can use straight-through twisted pair cable to connect any type of network device to the switch.

ˆIf your network topology contains a loop where two or more network devices can communicate with each other over more than one network path, do not connect the network cables forming the loop until after you have activated the Rapid Spanning Tree Protocol on the switch. Data loops can adversely affect network performance.

ˆIf you are creating a port trunk, configure the switch’s management software before connecting the cables of the trunk to the switch. Otherwise, a network loop will result which can adversely affect network performance.

ˆIn order for a switch port to successfully Auto-Negotiate its duplex mode with an end node, the end node should also be using Auto- Negotiation. Otherwise, a duplex mode mismatch can occur. A switch port using Auto-Negotiation defaults to half-duplex if it detects that the end node is not using Auto-Negotiation. This can result in a mismatch if the end node is operating at a fixed duplex mode of full-duplex.

To avoid this problem, disable Auto-Negotiation on a switch port and set the port’s speed and duplex mode manually if the end node has a fixed duplex mode of full-duplex.

37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Installation Guide Page Electrical Safety and Emissions Standards Translated Safety Statements Contents Contents Figures Figures Tables Tables Preface Symbol Meaning Description Safety Symbols Used in this DocumentWhere to Find Web-based Guides Contacting Allied Telesis Management Software UpdatesChapter OverviewFeatures AT-FS750/16 Front and Back PanelsUplink Combo Ports PortsState Description LEDsSpeed Power Supply Network Topologies Power Workgroup TopologyAT-FS750/16 Collapsed BackboneOverview Installation Reviewing Safety Precautions Page Selecting a Site for the Switch Maximum Cable SpecificationsSpeed Type of Cable Unpacking the Switch Installing the Switch on a Desktop Attaching the Rack-Mount Bracket to the AT-FS750/16 Switch Installing the Switch in an Equipment RackMounting the AT-FS750/16 Switch in an Equipment Rack Installing an Optional SFP Transceiver SFP Transceiver Installation Cabling the Switch Powering On the Switch Troubleshooting Troubleshooting Physical Specifications Technical SpecificationsEnvironmental Specifications Power SpecificationsConnectors and Port Pinouts Safety and Electromagnetic Emissions CertificationsPin Signal Pin Pair Signal Appendix a Technical Specifications

AT-FS750/24, AT-FS750/16, FS750/24, FS750/16 specifications

The Allied Telesis AT-FS750 series is a robust line of Fast Ethernet switches designed for efficient networking in both small and medium-sized business environments. This series includes models such as the AT-FS750/24 and AT-FS750/16, as well as the FS750/16 and FS750/24, each offering unique features tailored to specific network requirements.

One of the main features of the AT-FS750 series is its high port density, with models like the FS750/24 providing 24 Fast Ethernet ports and models like the FS750/16 offering 16 ports. This extensive port availability allows organizations to expand their networks seamlessly, accommodating various devices from computers to printers without the need for additional switches.

The switches support a range of Ethernet technologies, including auto-negotiation, which automatically adjusts the speed and duplex settings efficiently, ensuring optimal performance. This feature is particularly beneficial in dynamic network environments where devices of varying speeds may be connected.

Reliability is a hallmark of the AT-FS750 series, as these switches are designed with enhanced power supply features that allow for redundancy and minimize downtime. The devices also come equipped with advanced network management features, enabling administrators to efficiently monitor and control network traffic. All models in the AT-FS750 series support VLAN (Virtual Local Area Network) configuration, allowing for network segmentation and improved security.

Moreover, the AT-FS750 series switches implement Quality of Service (QoS) mechanisms that prioritize critical network traffic, ensuring that key applications, such as voice over IP and video conferencing, receive the bandwidth they need for uninterrupted service. This capability is crucial for businesses that rely on consistent communication channels.

Additionally, the switches offer a compact form factor, making them suitable for installation in a variety of environments, including smaller server rooms and office spaces. Their fanless design contributes to quiet operation, ideal for workspaces that require a noise-free atmosphere.

In summary, the Allied Telesis AT-FS750/24, AT-FS750/16, FS750/16, and FS750/24 switches are designed with reliability and efficiency in mind. With advanced Ethernet technologies, extensive management features, and a focus on security and performance, these switches cater to businesses looking for scalable networking solutions that grow with their evolving needs.
Top Page Image Contents