Allied Telesis GS900/8POE manual Installing an Optional SFP Transceiver

Page 41

AT-GS900/8POE Gigabit Ethernet Switch Installation Guide

Installing an Optional SFP Transceiver

To install an SFP transceiver in an AT-GS900/8POE Gigabit Ethernet switch, perform the following procedure:

Note

The transceiver can be hot-swapped; you do not need to power off the switch to install a transceiver. However, always remove the cables before removing the transceiver.

Note

You must install the transceiver before you connect cables to it.

1.Remove the transceiver from its shipping container and store the packaging material in a safe location.

Note

You must use the original shipping material if you need to return the module to Allied Telesis.

Warning: An SFP transceiver can be damaged by static electricity. Be sure to observe all standard electrostatic discharge (ESD) precautions, such as wearing an antistatic wrist strap, to avoid damaging the transceiver.

2. Remove the dust plug from the SFP slot.

Note

Unnecessary removal and insertion of a SFP module can lead to premature failure.

3.Locate the label on the transceiver and turn it so that the label is on top and the alignment groove is on the bottom.

41

Image 41
Contents Installation Guide Page Electrical Safety and Emissions Standards Translated Safety Statements Contents Page Figures Figures Tables Tables Preface Symbol Meaning Description Safety Symbols Used in this DocumentWhere to Find Web-based Guides Contacting Allied Telesis WarrantyChapter Overview10/100/1000Base-T Twisted Pair Port LEDs FeaturesTwisted Pair Ports Port DescriptionsShows an example of an SFP transceiver LED LEDsDescribes the SFP port LED SFP Port LED Power Supply Power over Ethernet Minimum Power Maximum Power Class MAC Address Table Duplex Mode Ethernet Switching BasicsStore and Forward Back Pressure and Flow Control Network Topologies Power Workgroup TopologyPoE Network Topology Installation Reviewing Safety Precautions AT-GS900/8POE Gigabit Ethernet Switch Installation Guide Selecting a Site for the Switch Speed Type of Cable Maximum Planning the InstallationUnpacking the Switch 1000Base Installing the Switch on a Table or DesktopMounting the Switch on a Wall 972 S900/8 Installing the Switch in a RackAT-GS900/8POE Gigabit Ethernet Switch Installation Guide Installation Installing an Optional SFP Transceiver 968 Cabling Twisted Pair Ports Cabling and Powering on the SwitchCabling an SFP Transceiver Powering on the Switch Installation LNK/ACT Port LED is Off TroubleshootingPWR LED is Off PD Error LED is On Physical Specifications Technical SpecificationsEnvironmental Specifications Power SpecificationsEMI Safety and Electromagnetic Emissions CertificationsPin Signal RJ-45 Twisted Pair Port ConnectorsAppendix a Technical Specifications

GS900/8POE specifications

The Allied Telesis GS900/8POE is a versatile and robust switch designed for small to medium-sized enterprises that require reliable network performance combined with power over Ethernet (PoE) capabilities. As part of the GS900 series, this switch offers a range of features, technologies, and characteristics that cater to modern networking demands.

One of the main features of the GS900/8POE is its eight 10/100/1000BASE-T Ethernet ports, which enable seamless connectivity for a variety of devices. Each port is equipped with Power over Ethernet capabilities, allowing the switch to deliver up to 15.4 watts of power per port. This is particularly beneficial for powering devices such as IP cameras, wireless access points, and VoIP phones without the need for additional power sources, minimizing installation costs and clutter.

The GS900/8POE also supports advanced Layer 2 switching capabilities, including VLAN (Virtual Local Area Network) support, which enhances network segmentation and security. By allowing administrators to create isolated networks within a larger network, VLANs reduce broadcast traffic and improve overall performance. Additionally, the switch supports Quality of Service (QoS) features, ensuring that time-sensitive applications, such as video streaming and voice communications, receive priority over less critical data.

Another noteworthy characteristic of the GS900/8POE is its fanless design, which makes it ideal for environments where noise levels need to be kept to a minimum. This design approach not only enhances the aesthetics of the deployment area but also increases reliability by reducing moving parts that could potentially fail.

Security is also a significant focus in the GS900/8POE's design, with features like MAC address filtering and DHCP snooping to protect against unauthorized access and potential network attacks. These safeguards ensure that network administrators can maintain control over connected devices and mitigate risks associated with security breaches.

In summary, the Allied Telesis GS900/8POE switch is a feature-rich solution that meets the demands of modern networks. Its PoE capabilities, advanced Layer 2 features, fanless operation, and robust security measures make it an excellent choice for businesses looking to expand their network infrastructure while keeping operational efficiency and reliability at the forefront. Whether used in a small office setting or for branch locations, the GS900/8POE provides a compelling balance of performance and functionality.