Allied Telesis x900, XEM-2XP manual Installation Procedure, AlliedWare Plus Operating System

Page 18

Installation Guide

Installation Procedure

The installation procedure and XEMs supported by each switch depend on the operating system running on the switch.

AlliedWare Plus™ Operating System

Switches running the AlliedWare Plus™ operating system support all XEMs. All XEMs except the XEM-STK are hot-swappable and can be installed following either of these procedures:

“Installing or replacing XEMs without hot swap support” on page 18

“Installing or replacing XEMs with hot swap support” on page 19

The XEM-STK is hot-removable only. To remove the XEM-STK, disconnect the stacking cables, loosen the thumbscrews on the faceplate and remove the XEM. To install or replace the XEM-STK, follow the procedure “Installing or replacing XEMs without hot swap support” on page 18.

AlliedWare® Operating System

Switches running the AlliedWare® operating system support all XEMs except the XEM-STK and the XEM-2XP. XEMs are not hot-swappable under the AlliedWare® operating system and must be installed following the procedure “Installing or replacing XEMs without hot swap support” on page 18.

Before you begin

Unpack the XEM.

In an anti-static environment, remove the XEM from its packing material. Be sure to observe ESD precautions.

Caution Failure to observe proper anti-static procedures may damage the unit. If you are unsure about correct procedures, contact your authorised Allied Telesis distributor or reseller.

Verify the package contents if you have not already done so.

See “Package Contents” on page 5. If any items are damaged or missing, contact your authorised Allied Telesis distributor or reseller.

Read the safety information for the switch.

Safety information is available in the Installation and Safety Guide that is shipped with each switch. You can also download this document from www.alliedtelesis.com/support/software.

17

Image 18
Contents Expansion Module Installation Guide Expansion Module Installation Guide Page Contents Compatible Switches and Operating Systems About this GuidePackage Contents Compatible Pluggable Optical ModulesXEM-1XP 10Gigabit XFP Port LEDInstallation Guide XEM-2XP Dual 10Gigabit XFP Ports Installation Guide XEM-12S 100/1000BASE-X SFP Ports SFPInstallation Guide XEM-12T 10/100/1000BASE-T RJ-45 Ports Installation Guide XEM-2XT Dual 10GBASE-T RJ-45 Ports XEM-STK Stacking Ports Page Installation Procedure AlliedWare Plus Operating SystemInstalling or replacing XEMs without hot swap support Installing or replacing XEMs with hot swap support Awplusshow system awplusenable awplus#show log Obtaining Documentation and Resources Contacting us
Related manuals
Manual 9 pages 6.38 Kb Manual 8 pages 39.31 Kb

XEM-2XP, x900 specifications

The Allied Telesis x908 and the SwitchBlade x900 series of network switches are cutting-edge solutions designed to address the demands of modern networking environments. These switches are known for their high performance, reliability, and robust feature sets, making them ideal for enterprise and service provider networks.

The Allied Telesis x908 series consists of modular and chassis-based systems that can accommodate a variety of network configurations. One of the main features of the x908 series is its ability to offer high scalability with support for a large number of ports. This makes it suitable for data centers and large enterprise networks where space and bandwidth optimization are critical.

In addition to scalability, the x908 series supports advanced Layer 2 and Layer 3 switching capabilities. This allows for efficient traffic management and routing, ensuring that data is delivered swiftly and reliably. The x908 also incorporates intelligent features such as Quality of Service (QoS), which prioritizes critical network traffic, ensuring that time-sensitive data—like voice and video—maintains its quality during transmission.

The SwitchBlade x900 series takes this functionality further with its innovative modular architecture. This allows organizations to configure their networks to meet specific needs by choosing from a variety of interface cards and service modules. The SwitchBlade x900 also supports advanced security features such as Access Control Lists (ACLs) and VLAN segmentation, which provide enhanced protection against unauthorized access and network threats.

Another hallmark of the x908 and SwitchBlade series is their support for high-speed Ethernet technologies, including 10G and 40G Ethernet. This enables organizations to keep pace with the increasing bandwidth demands of applications and services, particularly in cloud computing and data-intensive workloads.

Both the x908 and the SwitchBlade x900 series are designed with energy efficiency in mind, featuring power-saving technologies that reduce overall operational costs. Coupled with Allied Telesis' management tools, which provide detailed analytics and monitoring, network administrators can optimize performance and energy consumption simultaneously.

In summary, the Allied Telesis x908 and SwitchBlade x900 series offer a comprehensive suite of features, high performance, scalability, and advanced networking technologies. They represent a strategic investment for organizations looking to build resilient, efficient, and future-proof network infrastructures.