Allied Telesis AT-9924T-40, X900-48FE-N, AT-9924T/4SP-A-20 Example 5 Epsr with management stacking

Page 23

Example 5: EPSR with management stacking

Example 5: EPSR with management stacking

In this example:

•three switches are stacked together, so you can manage all three switches by entering commands into the CLI of any one of them

•the three switches are also configured as an EPSR domain

•vlan1000 is used as the stacking VLAN and as the EPSR control VLAN. Stacked switches use the stacking VLAN to communicate with each other

•

•

the data VLAN for EPSR is vlan20

ports on the stacked switches are numbered using the stacking scheme of hostid.0.port

 

 

vlan45

 

 

P

S

 

 

port 1.0.1:

port 1.0.2:

 

 

primary

secondary

 

 

 

Master

 

 

 

Node

 

 

 

(host1)

 

 

port 2.0.1

port 3.0.1

 

Transit

 

 

Transit

Node

port 2.0.2

port 3.0.2

Node

(host2)

 

 

(host3)

vlan30

 

 

 

 

 

 

epsr-example-stack

Page 23 AlliedWare™ OS How To Note: EPSR

Page 22 Page 24
Image 23
Page 22 Page 24
Contents What information will you find in this document? IntroductionWhich products and software versions does it apply to? Epsr Components How Epsr WorksEstablishing a Ring Fault in a link or a transit node Recovering from a FaultFault in the master node Transit Nodes with Both Ports Down Restoring Normal OperationMaster Node Transit Nodes with One Port DownConfiguring Epsr How To Configure EpsrConfigure other ports and protocols as required Iii. Remove the ring ports from the default VlanIv. Configure the Epsr domain Enable EpsrModifying the Control Vlan Example 1 a Basic Ring Configure the Master Node aAdd the data Vlan to the domain Configure the Transit Nodes B and CRemove the ring ports from the default Vlan Create the Epsr domainCreate epsr=test mode=transit controlvlan=vlan1000 Example 2 a Double Ring Configure the master node switch a for domainConfigure Epsr Configure the master node switch C for domainConfigure the data Vlan for domain Example 3 Epsr and Rstp Configure the master node switch a for the Epsr domainRemove the STP VLAN’s ports from the default Vlan Configure switch E for Epsr and Rstp Epsr Domain Example 4 Epsr with Nested VLANsConfigure the Epsr control Vlan Configure client switch H connected to transit node D Configure client switch E connected to the master nodeConfigure client switch F connected to transit node B Configure client switch G connected to transit node CExample 5 Epsr with management stacking Configure stacking on the second transit node host3 Configure stacking on the first transit node host2Configure Epsr on the stacked switches Configure the other VLANs on the stacked switchesExample 6 Epsr with an iMAP Configure the AT-TN7100 iMAP as Master NodeFollowing diagram shows the expected output Checking the Master Node ConfigurationChecking the Transit Node Configuration Configure the AT-TN7100 iMAP as a Transit NodeLINKS-UP Classifiers and Hardware FiltersPorts and Recovery Times Health Message Priority Igmp Snooping and Recovery TimesEpsr State and Settings Epsr Information Name Domain1 Snmp Traps Counters Master node sends Health messages DebuggingLink Down Between Master Node and Transit Node Master Node Node a Debug OutputPrimary port goes down Master node continues sending Health messagesMaster node transmits a Ring-Down-Flush-FDB message Primary port comes back up Hello timer expiresHello timer expires again Master node receives the Ring-Up-Flush-FDB message on port Master node returns the ring to a state of CompleteMaster node transmits and receives Health messages Transit node receives Health messages Transit Node Node B Debug OutputTransit node receives a Ring-Down-Flush-FDB message Port 1 on the transit node goes downTransit node receives a Health message Port 1 comes back upTransit node receives a Ring-Up-Flush-FDB message 252 Link Down Between Two Transit Nodes Link between the two transit nodes goes down Master node receives a second Link-Down message Master node receives a Health message 51 AlliedWare OS How To Note Epsr 375 53 AlliedWare OS How To Note Epsr Transit node sends a Link-Down message Transit node receives another Health message Link comes back upTransit node receives a Ring-Up-Flush-FDB message

AT-9924SP-30, AT-9924T-40, AT-8948, AT-9924T/4SP-A-20, X900-48FE-N specifications

Allied Telesis is a leading provider of networking solutions, renowned for its innovative technologies and high-performance networking equipment. Among its extensive product lineup, the X900-48FE-N, AT-9924T-40, AT-8948, AT-9924T/4SP-A-20, and AT-9924SP-30 stand out for their remarkable features and capabilities.

The X900-48FE-N is a robust layer 2/3 managed switch that features 48 Fast Ethernet ports. This model is particularly known for its energy efficiency and reliability, making it a suitable choice for enterprises with demanding networking needs. It supports a wide range of Layer 2 Ethernet switching technologies, including VLANs, Spanning Tree Protocol (STP), and Link Aggregation Control Protocol (LACP), which enhances network reliability and efficiency.

The AT-9924T-40 is a versatile switch designed for high-performance environments. It offers a rich set of features, including 24 Gigabit Ethernet ports and 4 SFP ports for fiber connectivity. This device is equipped with Advanced Layer 2 and Layer 3 features, including IPv4/IPv6 support, Quality of Service (QoS) capabilities, and robust security options. This switch is ideal for core and distribution deployments within enterprise networks, ensuring fast and reliable connectivity.

The AT-8948 is another important model in Allied Telesis' offerings. It features 48 10/100 Mbps Ethernet ports and 4 Gigabit uplink ports, providing a high density of connectivity options. The AT-8948 is also equipped with advanced management capabilities, including SNMP, RMON, and web-based management, allowing for easy configuration and monitoring of the network.

The AT-9924T/4SP-A-20 offers a combination of 24 Gigabit Ethernet ports and 4 SFP slots to extend network capabilities through fiber connections. It is particularly well-suited for environments requiring high bandwidth and flexible connectivity. Its compact design makes it an excellent choice for data centers and enterprise networks.

Lastly, the AT-9924SP-30 is characterized by its 24 Gigabit SFP ports, offering flexibility in terms of fiber connectivity. This switch supports advanced routing capabilities and is designed for high-availability environments. Its ability to handle diverse network traffic while maintaining optimal performance makes it a valuable asset for any modern enterprise.

In summary, these Allied Telesis models showcase advanced features, network reliability, and versatile management options, making them critical components for efficient and scalable networking solutions.
Top Page Image Contents