Allied Telesis AT-GS24, AT-GS950/24 manual Configure Factory Default Values

Page 32

How to Start an AT-GS950/24 WEB Management Session

Configure

Factory Default

Values

Figure 14. Factory Default Reset/Reboot Page

3.Go to the lower part of the page to the Reboot section.

4.In the Reboot Type field, select Normal from the pull-down menu. When the switch is rebooted with this selection, all configuration parameters that are saved in flash memory are loaded into the switch’s active memory.

Note

Two additional options are available in the Reboot Type field. The procedures for these options are described in "Configure Factory Default Values".

5.Click Apply.

The switch immediately begins to reload the AT-S109 Management software and configuration parameters. This process takes approximately two minutes to complete. You can not manage the device during the reboot. After the reboot is finished, you can log in again if you want to continue to manage the switch.

This procedure returns all AT-S109 Management software parameters to their factory default values and deletes all tagged and port-based VLANs on the switch.

Note

The AT-S109 Management software default values are listed in the AT-GS950 Web User Guide..

32

Image 32
Contents How to Start a WEB Management Session Copyright 2011 Allied Telesis, Inc How to Start an AT-GS950/24 WEB Management Session Entering a Switch’s IP Address in the URL Field How to Start an AT-GS950/24 WEB Management Session  Snmp How to Start an AT-GS950/24 WEB Management Session Web Browser Tools Configuration of IP Address, Subnet Mask and Gateway Address How to Start an AT-GS950/24 WEB Management Session IP Access List Configuration Create an IP Access ListYou can add up to 10 IP address to the IP Access List table Delete an IP Address List Entry Manually Setting System Time System TimeHow to Start an AT-GS950/24 WEB Management Session Setting Daylight Savings Parameters Daylight Savings Time Status field, select EnabledDhcp and ATI Web Discovery Tool Dhcp Client Configuration How to Start an AT-GS950/24 WEB Management Session Dhcp Auto Configuration System Management Information How to Start an AT-GS950/24 WEB Management Session User Name and Password Configuration Add New User Name PasswordModify User Name Password Delete User Name and Password User Interface Configuration User Interface Timeout System Information Display How to Start an AT-GS950/24 WEB Management Session Switch Reboot Password Protection Factory ResetHow to Start an AT-GS950/24 WEB Management Session Configure Factory Default Values How to Start an AT-GS950/24 WEB Management Session Disabling Factory Default Reset Feature How to Start an AT-GS950/24 WEB Management Session Enabling Factory Default Reset Pinging a Remote System How to Start an AT-GS950/24 WEB Management Session SSL Settings How to Start an AT-GS950/24 WEB Management Session System Log Configuration System Log ConfigurationHow to Start an AT-GS950/24 WEB Management Session Factory Default Quitting a Web Browser Management Session
Related manuals
Manual 2 pages 53.27 Kb

AT-GS24, AT-GS950/24 specifications

The Allied Telesis AT-GS950/24 is a robust and versatile gigabit Ethernet switch designed to cater to the growing demands of networked environments. With its 24 10/100/1000 Mbps ports, this switch provides high-speed connectivity essential for modern business operations, allowing organizations to seamlessly connect a variety of devices such as computers, printers, and servers.

One of the standout features of the AT-GS950/24 is its Layer 2 switching capabilities, which enhance network performance and reliability. It supports a range of advanced network protocols, including VLANs (Virtual Local Area Networks), link aggregation, and Spanning Tree Protocol (STP). These features ensure optimal network traffic management and improved security by segmenting network traffic, thus isolating different departments or user groups.

The AT-GS950/24 also incorporates Quality of Service (QoS) functionality, enabling businesses to prioritize critical traffic. This is particularly valuable in environments where bandwidth-heavy applications, such as video conferencing or VoIP, are commonplace. By assigning priority levels to different types of data, the switch ensures a smooth and uninterrupted user experience.

In terms of management capabilities, the AT-GS950/24 offers both Web-based and command-line interface (CLI) management options. This flexibility allows network administrators to configure and monitor the switch easily, even across expansive networks. Moreover, support for SNMP (Simple Network Management Protocol) facilitates remote management and proactive network monitoring.

The hardware design of the AT-GS950/24 is equally impressive, featuring a fanless operation that enhances its reliability and reduces noise—ideal for office environments. The switch is also built to support rack mounting, making it easy to integrate into existing data center setups or network closets.

Energy efficiency is another significant aspect of the AT-GS950/24, as it complies with the IEEE 802.3az Energy Efficient Ethernet standard. This feature helps organizations reduce power consumption, leading to lower operational costs and a smaller carbon footprint.

In summary, the Allied Telesis AT-GS950/24 is a comprehensive solution for businesses looking to enhance their network infrastructure. With its array of features, including high-speed connectivity, advanced traffic management, and energy efficiency, this switch stands out as a valuable asset in any networking environment, supporting the evolving demands of modern technology.