Here is an example of the information | Allied Telesis AT-9000

AlliedWare Plus Version 2.1.2 Software Release Notes

Upgrading the AT-9000 Switch to AlliedWare Plus Version 2.1.2 from Version 2.1.1

This section contains the procedure for upgrading the switch from AlliedWare Plus Version 2.1.1 to version 2.1.2, from the command line. Here are the upgrade requirements:

There must be a TFTP server on your network.

The switch must be assigned an IP address. For instructions, refer to the AT-9000 AlliedWare Plus User’s Guide.

Caution:

The upgrade process is disruptive to network operations because it resets the switch. The switch does not forward network traffic during the reset.

There are three phases to upgrading the switch:

“Phase 1. Uploading the Active Boot Configuration File to Your TFTP Server” on page 3

“Phase 2: Downloading the New AlliedWare Plus Version 2.1.2 Management Software” on page 4

“Phase 3: Updating the Commands” on page 4

Phase 1. Uploading the Active Boot Configuration File to Your TFTP Server

Allied Telesis recommends uploading the active boot configuration file from the switch to your TFTP server before updating the management software on the switch. You’ll use the file in phase 3 to check for v2.1.1 commands that are not compatible with v2.1.2. To upload the active boot configuration file:

1. Start the TFTP server on your network.

1.Start a local or remote management session on the switch.

2.When prompted, enter a username and password. The defaults are “manager” for the username and “friend” for the password.

3.Move to the Privileged Exec mode and enter the SHOW BOOT command to display the name of the active boot configuration file:

awplus# show boot

Here is an example of the information.


Current software			:	v2.1.1
Current boot image :				v2.1.1
Backup boot image			:	Not set
Default	boot	config:		/cfg/boot.cfg
Current	boot	config:		/cfg/sw2bldg2.cfg (file exists)

The name of the active boot configuration file is displayed in the “Current boot config” line.

4.Use the COPY command to upload the boot configuration file from the switch to the TFTP server. Here is the format of the command:

copy flash tftp ipaddress filename.cfg

The IPADDRESS parameter is the IP address of the TFTP server. The FILENAME parameter is the name of the boot configuration file you want to upload from the switch to TFTP server. The filename extension must be “.cfg” for boot configuration files. The filename cannot contain spaces.

PN 613-001447 Rev A

Allied Telesis, Inc.

AT-9000 specifications

Allied Telesis, a leading provider of Ethernet networking solutions, has developed the AT-9000 series switches, catering to the needs of modern enterprises. The AT-9000, a part of this series, stands out due to its robust features, advanced technologies, and high performance, making it an ideal choice for businesses seeking reliable network infrastructure.

One of the main features of the AT-9000 is its Layer 2 and Layer 3 switching capabilities. This flexibility allows network administrators to manage both traditional and more advanced networking scenarios seamlessly. The switch supports various protocols, including VLANs, which enhance network segmentation and improve security. This is particularly beneficial for organizations that need to maintain multiple networks within a single physical infrastructure.

The AT-9000 also incorporates Green Ethernet technology, which optimizes energy consumption by automatically adjusting power based on the current network traffic load. This not only helps organizations reduce their energy costs but also contributes to environmental sustainability efforts, aligning with corporate social responsibility goals.

In terms of performance, the AT-9000 series is equipped with a high-speed backplane, facilitating fast data transfer rates and minimizing latency. The switches are designed to support high bandwidth applications, ensuring that data flows efficiently even during peak usage times. With support for QoS (Quality of Service), network administrators can prioritize critical traffic, ensuring that essential applications receive the bandwidth they require for optimal performance.

Another notable characteristic is the AT-9000's user-friendly management interface. The switch can be managed through a web interface or the Command Line Interface (CLI), allowing for easy configuration and monitoring. Additionally, it supports SNMP (Simple Network Management Protocol) for standardized network management practices, therefore providing visibility and control across the entire network.

Moreover, the AT-9000 supports stacking capabilities, enabling multiple switches to function as a single unit. This feature simplifies management and enhances network scalability, allowing businesses to expand their network infrastructure as they grow without overhauling existing systems.

In conclusion, the Allied Telesis AT-9000 switch is a versatile, powerful, and efficient solution for enterprise networking. Its combination of Layer 2 and Layer 3 capabilities, energy-efficient technologies, high performance, and ease of management positions it as an advantageous choice for businesses looking to enhance their network infrastructure. With these features, the AT-9000 series continues to be a reliable component in modern networking environments.