Making Asynchronous Ports Respond More Quickly (CR00011565)  | 42  | 
Figure 1: New parameters in the output of the show asyn=0 command
ASYN 0 : 0000001470 seconds  | Last change at: 0000001465 seconds  | 
ASYN information  | 
  | 
Name  | Asyn 0  | 
Status  | enabled  | 
Mode  | Ten  | 
Data rate  | 9600  | 
Parity  | none  | 
Data bits  | 8  | 
Stop bits  | 1  | 
Test mode  | no  | 
In flow state (mode)  | on (Hardware)  | 
Out flow state (mode)  | off (Hardware)  | 
Autobaud mode  | disabled  | 
Max tx queue length  | 16  | 
TX queue length  | 3  | 
Transmit frame  | none  | 
RX queue length  | 0  | 
IP address  | none  | 
Max transmission unit  | 1500  | 
Ten timer value | 100 | 
.  | 
  | 
.  | 
  | 
.  | 
  | 
  | 
  | 
Version