APC Worldwide Customer Support

Installation Guide Smart-UPS I/O Hardwire Kit

Safety Information - read these instructions before hardwiring the UPS

Wiring must be performed by qualified electrical personnel.

Adhere to all national and local electrical codes when wiring this unit.

1.Disconnect equipment connected to the UPS.

NOTE: Model 5000RM5U has four internal batteries. The two front batteries must be disconnected.

2.Press the OFF button located on the front of the UPS.

3.Disconnect batteries from the UPS.

a.Model 5000RM5U has four internal battery modules. The two front internal batteries must be disconnected.

b.Models 2200/3000XL require the disconnect of one internal battery module. The XL models may have external batteries connected to the UPS. The external batteries must be disconnected from the UPS.

c.All other units require the disconnect of one internal battery module.

4.Disconnect the UPS from utility power.

When removing the panels from the UPS, note which cable is connected to the AC input. There are two 4-pin connectors on the UPS and they are not interchangeable.

Customer support for this or any other APC product is available at no charge in any of the following ways:

•Refer to the APC Web site to access documents in the APC Knowledge Base and to submit customer support requests.

–www.apc.com (Corporate Headquarters)

Connect to localized APC Web sites for specific countries, each of which provides customer support information.

–www.apc.com/support/

Global support searching APC Knowledge Base and using e-support.

•Contact an APC Customer Support center by telephone or e-mail.

Local, country-specific centers: go to www.apc.com/support/contact for information.

Contact the APC representative or other distributor from whom you purchased your APC product for information on how to obtain local customer support.

APC, the APC logo, and Smart-UPS are trademarks of American Power Conversion Corporation.

All other trademarks, product names, and corporate names are the property of their respective owners and are used for informational purposes only.

Package Contents

	Terminal block
	Terminal block label
	Screws for securing terminal block to UPS
8 screws for securing	2 wire nuts	4 grounding screws
panels to UPS	2 wire nuts	4 grounding screws
panels to UPS
	Model 2200/3000 Tower 100/120/230 V
	Input and output panels
	Blank panel to cover terminal block
	Model 2200/3000XL 120/208/230 V
	Input panel
	Output panel
	Blank panel to cover terminal block
	Model 5000RM5U 208/230 V
	Input and output panels
	Blank panel to cover terminal block

990-3239A

7/2008

SUA0317, SUA5000RMT5U specifications

The APC SUA5000RMT5U and SUA0317 are high-performance uninterruptible power supplies (UPS) designed to provide reliable power protection for critical equipment in various applications. The SUA5000RMT5U is a robust 5000VA/4500W model within the Smart-UPS series, while the SUA0317 serves as a dedicated battery module designed to extend the runtime of the main UPS unit.

One of the main features of the APC SUA5000RMT5U is its dual conversion online technology. This allows the UPS to provide continuous power conditioning and voltage regulation, ensuring that connected devices receive clean and stable electricity. The online design means that the UPS constantly supplies power through its inverter, allowing for zero transfer time in the event of a power outage. This is particularly critical for sensitive electronics and mission-critical applications.

The SUA5000RMT5U also boasts an impressive battery backup time, thanks to its large internal battery capacity. The unit can be expanded with additional external battery modules like the SUA0317, which can significantly extend the UPS runtime during prolonged outages. This modular design provides flexibility to scale according to power requirements and runtime needs, making it suitable for expanding IT environments.

Another notable characteristic is the UPS's ability to support multiple plug types, including various receptacles for easy integration with different devices. It is equipped with PowerChute management software, allowing users to easily monitor and manage battery runtimes, configure alarms, and keep track of power consumption metrics. This software enhances the user experience, enabling proactive maintenance and troubleshooting.

The SUA5000RMT5U provides advanced communications capabilities, including USB and serial ports, as well as optional network management cards for remote monitoring and management. This ensures that users can receive real-time updates and alerts regarding their UPS status, making it easier to maintain system reliability.

In summary, the APC SUA5000RMT5U and SUA0317 together form a powerful UPS system tailored for applications needing durability and reliability. With advanced features like dual conversion technology, scalable battery backup options, comprehensive monitoring capabilities, and strong user support through PowerChute, they are ideal solutions for protecting critical infrastructure in IT environments, medical facilities, and industrial applications.