ATEN Technology CS-64U user manual Alternate Port Switching Keys, Keyboard Operating Platform

Alternate Port Switching Keys

The port switching activation keys can be changed from tapping the Scroll Lock key twice ([Scroll Lock] [Scroll Lock]) to tapping the Ctrl key twice. To change the port switching activation keys, do the following:

1.Invoke HSM (see p. 10)

2.Press and release the T key

Note: This procedure is a toggle between the two methods. To revert back to the original [Scroll Lock] [Scroll Lock] method, invoke HSM, then press and release the T key again.

Keyboard Operating Platform

The CS-64U’s default port configuration is for a PC Compatible keyboard operating platform. If your requirements call for different port settings (you have a Mac or Sun attached to a port, e.g.), you can change a port’s keyboard operating platform configuration as follows:

1.Bring the KVM focus to the port you want to set.

2.Invoke HSM (see p. 10)

3.Press and release the appropriate Function key (see table). After completing a setting, you automatically exit HSM.

Function Key	Operation
[F10]	Auto detects the keyboard operating platform (for
	PC compatible systems).
[F2]	Sets the Mac keyboard operating platform.
[F3]	Sets the Sun keyboard operating platform.*

*The first time that the Sun system runs from a port, you must configure its port for the Sun keyboard operating platform before you turn the system on, or else the Sun system will not start.

-11 -

2004-06-10