ATEN Technology CS-102 user manual Appendix, LEDs, DIP Switch Setting, Condition Pattern

Appendix

LEDs

The CS-102/CS-122 contains one Power LED, two Ready LEDs, and two Port Select LEDs on its front panel. Their indications are as follows:

Power LED:	Lights when the CPU Switch is running.
Ready LED:	Lights when the connected PC or CPU Switch is running.
Port Select LED:	Lights to indicate the currently selected port.

Depending on conditions, the Port Select LED turns on and off according to the following pattern:

	Condition	Pattern
1	Port Not Selected	Off
2	Port Connects to a CPU Switch	Flashes Long Off; Short On
3	Port Connects to a Computer	Steady On
4	Port Connects to a Computer Under Previous/Next Mode	Flashes Long On; Short Off
5	Port Connects to a Computer Under Scan Mode	Flashes On and Off Equally

DIP Switch Setting

Scan Time is determined by the DIP Switch of the First Stage* CPU Switch. For the second and the third-stage CS-102/122 units, all DIP switches are set to Off.

		DIP Switch Number			Scan Time
1	2		3	4
ON	ON		X	ON	3 Sec.
OFF	ON		X	ON	10 Sec.
ON	OFF		X	ON	20 Sec.
OFF	OFF		X	ON	40 Sec.

* The CPU Switch that the keyboard, monitor, and mouse connect to is the First Stage unit.