Cisco Systems EVOKE-1 manual Storing and recalling presets, Multiplex name

Page 14

Multiplex name

Displays the name of the multiplex in which the current service is found, see Guide to Digital Radio

 

on page 14 for more information on multiplexes.

Date and time

Displays the date and time obtained from the current multiplex.

Channel

Displays the channel identifier and frequency for the station to which you are tuned, see Guide to

 

Digital Radio on page 14 for more information.

Mode

Displays the mode of the current service, Stereo or Mono and the data rate at which the audio

 

signal is being transmitted. This rate is set by the broadcaster to suit the type and quality of

 

material being transmitted.

Signal quality

Displays the signal quality for the signal to which you are tuned. As a guide values from 85 to 100

 

indicate good reception, 70 to 84 borderline reception and 0 to 69 poor reception. You can attempt

 

to improve this signal quality by adjusting your aerial position using the Tuning aid described on

 

page 12.

Storing and recalling presets

The numbered buttons (1-6) enable you to store radio stations for one-touch access.

To store a station

You can store a station to a preset while listening to it or when you see the station name on the bottom line of the display while scrolling through the station list.

Press and hold down a numbered button for around two seconds to store the station under that number. The display shows e.g. ‘Preset 1 saved’ when the station has been successfully saved. Once you save a station to a preset, the station name has the preset number next to it on the station list.

To recall a previously stored station

Press and release the numbered button under which you stored the station. If the selected preset is empty the display shows ‘Preset empty’ for a few seconds and you continue listening to the currently selected station.

10

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Page Safety instructions CopyrightContents Page Introduction Unpacking Controls and Connectors Front PanelQuick start Rear PanelConnecting to an external amplifier Connecting upConnecting to an aerial Connecting to power supply Connecting to an external recorderConnecting an auxiliary speaker Connecting to headphones Tuning Using your EVOKE-1 ElgarSwitching on and off Tuning for the first timeAdjusting the volume Retuning your unitChanging the display mode Selecting a stationStoring and recalling presets Multiplex nameAdvanced setup options Station OrderSw version Tuning aidDRC Value Resetting your EVOKE-1 Elgar To select the reset optionGuide to digital radio Useful addresses LONDON, W1D 5DUTroubleshooting Can’t get any soundAerial advice Getting help AccessoriesWarranty information Technical specifications Pure Digital Home Park Estate

EVOKE-1 specifications

Cisco Systems EVOKE-1 is an innovative solution designed to enhance the operational efficiency and effectiveness of enterprise networks. The EVOKE-1 platform is tailored for organizations seeking a transformative approach towards networking and communications. As businesses evolve, the need for seamless connectivity, security, and data management becomes imperative. Cisco EVOKE-1 addresses these demands with advanced features and cutting-edge technologies.

One of the main features of EVOKE-1 is its ability to integrate seamlessly with existing network infrastructures. This integration helps organizations to maximize their current investments while modernizing their operational capabilities. The platform supports a range of connectivity options, including wired, wireless, and VPN services, allowing businesses to adapt to various work environments and preferences.

Cisco EVOKE-1 excels in providing enhanced security features crucial for today’s cyber landscape. It employs advanced encryption protocols and robust authentication mechanisms to ensure data integrity and confidentiality. The system also incorporates threat intelligence to proactively identify and mitigate potential vulnerabilities, safeguarding sensitive information from cyber threats.

The platform utilizes artificial intelligence and machine learning capabilities to optimize network performance. By analyzing traffic patterns and user behavior, EVOKE-1 can automatically adjust bandwidth allocation, reduce latency, and predict potential issues before they affect network performance. This proactive approach minimizes downtime and enhances user experience within the organization.

Another notable characteristic of EVOKE-1 is its scalability. Organizations can easily expand their network capabilities without significant disruptions, allowing for seamless growth as business needs evolve. This flexibility is matched by an intuitive management interface that simplifies network administration for IT teams, reducing the operational burden and enabling them to focus on strategic initiatives.

Moreover, Cisco EVOKE-1 is compatible with a wide array of third-party applications and services, providing organizations with the freedom to choose the tools that best suit their operational needs. This interoperability enables businesses to tailor their networking environments without being locked into a single vendor ecosystem.

In conclusion, Cisco Systems EVOKE-1 stands out as a robust solution for enterprises seeking to enhance their networking and communication capabilities. With its integrated security, AI-driven optimization, seamless scalability, and compatibility with multiple applications, EVOKE-1 is poised to support the evolving digital landscape, empowering businesses to thrive in a competitive market. As organizations continue to embrace digital transformation, solutions like Cisco EVOKE-1 will play a pivotal role in shaping the future of networking and communication.
Top Page Image Contents