Technicolor - Thomson MS2200 manual Settings

MS2200 EN 11/17/03 1:59 PM Page 10

Settings

EN Display

BASS

SURROUND

Showing Demonstration

Not operational in CD mode. Press DIMMER•DEMO / CD INFO to turn on/off demonstration mode. The demonstration scrolls through all display operations.

Setting the Clock

1.Press and hold CLOCK/RDS until the hour flashes on the display.

2.Press DIGITAL TUNING or to set

the hour and then press CLOCK/RDS to shift to minute digits.

3.Press DIGITAL TUNING or to set the minute.

4.Press PROG•SET to save settings and STOP to quit setting.

Note:

•When system is ON, you can press CLOCK/RDS to display the current time for about 2 seconds.

•Clock can not be set in FM mode.

Setting the Timer

1.Press and hold TIMER until the ON appear with the hour flashing ( ON - timer on time )

2.For setting time, press DIGITAL TUNING

or to set the hour and then press TIMER to shift to minute digits.

3.Press DIGITAL TUNING or to set the minute.

4.Press TIMER to change to OF (timer off time) with hour flashing. Repeat steps 2 & 3 for timer off time setting.

5.Press TIMER to select source. Press DIGITAL

TUNING or to select TUNER, TAPE or CD.

6.Press TIMER to set volume. Press VOLUME CONTROL up or down to set desired volume level.

7.Press PROG•SET to save settings or STOP to quit setting.

Activating the Timer

Press and release TIMER to turn on/off the timer.

The timer is active when the clock icon is lit.

Adjusting the Display Brightness

1.Press and hold DIMMER•DEMO / CD INFO for more than 2 seconds.

2.While the dimmer level is displayed, press and release DIMMER•DEMO / CD INFO repeatedly to select the desired level

(DIMM 1 - 3).

DIMM 2

Note:

•The dimmer level can only be adjust for when the unit is in ON mode.

•In standby mode, the dimmer level remains at DIMM 3 and in magic demo mode, the dimmer level is at DIMM 1.

5