Linksys SRW224G4, SRW2048 Maintenance Tab Restore Defaults, Maintenance Tab Integrated Cable Test

Page 94

WebView Switches

Destination File Name. Enter the configuration file name to which the file will be uploaded.

Transfer File Name. Specify the file type, Running Configuration or Startup Configuration. The Running

Configuration file holds all startup file commands and commands entered during the current session. The Startup

Configuration file holds the startup file commands needed by the Switch to power on or be rebooted.

Click the Submit button to begin the upload of the firmware or configuration file.

Maintenance Tab - Restore Defaults

The Restore Defaults screen lets you restore the Switch’s factory defaults.

Restore Company Defaults. Click Restore Company Defaults to restore the factory default settings.

 

Figure 5-82: Maintenance - Restore Defaults

NOTE: Before you restore the Switch’s factory defaults, note any settings you may want to use later.

 

 

Maintenance Tab - Integrated Cable Test

The Integrated Cable Test screen shows you results from performance tests on copper cables. The maximum cable length that can be tested is 120 meters. Cables are tested when the ports are in the down state, except for the Approximate Cable Length test.

Port. This is the port to which the cable is connected.

Test Result. This is the test result. OK indicates that the cable passed the test. No Cable means there is no cable connected to the port. Open Cable means the cable is connected on only one side. Short Cable indicates that a short has occurred in the cable. Undefined indicates that the test could not be properly performed.

Cable Fault Distance. This is the distance from the port at which the cable error occurred.

Last Update. This is the last time the port was tested.

Test Now. Click the Test Now button to perform the test.

Approximate Cable Length. This is the approximate length of the cable. The Approximate Cable Length test can be performed only when the port is up and operating at 1Gbps.

Figure 5-83: Maintenance - Integrated Cable Test

Chapter 5: Using the Web-based Utility for Configuration

84

Maintenance Tab - Restore Defaults

Page 93 Page 95
Image 94
Page 93 Page 95
Contents User Guide Copyright and Trademarks Word definitionTable of Contents WebView Switches Help Tab Spanning Tree Tab on SRW2048 Switches Mstp PropertiesGigabit Ethernet Fiber Optic Cabling Front Panel of the 16-Port Switch Back Panel of the 16-Port Switch24 Network Configuration 26 QoS CoS Settings 55 Statistics Etherlike Statistics 85 Maintenance Http File Download Introduction WelcomeWhat’s in this User Guide? Front Panel Getting to Know the SwitchOverview LEDsBack Panel ConsoleConnecting the Switch Maximum Cabling Distances From Maximum DistancePlacement Options Before You Install the SwitchDesktop Placement Rack-Mount Placement Attach the Brackets to the SwitchConsole Interface for Configuration for directions Using the Console Interface for Configuration Configuring the HyperTerminal ApplicationConnecting to the Switch through a Telnet Session COM1 PropertiesConfiguring the Switch through the Console Interface Switch Main MenuPort Configuration System Information Management Settings Security Settings IP Configuration Http 24 Network Configuration File Management Using the Web-based Utility for Configuration Accessing the Web-based UtilitySys. Info. System Information Tab System Mode Sys. Info. System Information Tab System DescriptionSys. Info. System Information Tab Forwarding Database System Information Forwarding DatabaseSys. Info. System Information Tab Time Synchronization System Information Time SynchronizationIP Conf. Configuration Tab IP Addr. Address IP Configuration IP AddressSwitch Conf. Configuration Tab Interface Conf. Configuration Interface Configuration Change Settings WebView Switches Switch Conf. Configuration Tab Vlan Vlan screen displays subgroups of a LAN Local Area NetworkSwitch Conf. Configuration Tab Vlan Interface Settings 12 Switch Configuration Vlan Interface SettingsSwitch Conf. Configuration Tab PVE Mapping Switch Conf. Configuration Tab Gvrp ParametersGvrp Parameters Gigabit Ethernet Switches only Switch Conf. Configuration Tab LAG Conf. Configuration 16 Switch Configuration LAG ConfigurationSwitch Conf. Configuration Tab Port Mirroring 18 Switch Configuration Port MirroringSwitch Conf. Configuration Tab Lacp 19 Switch Configuration LacpSwitch Conf. Configuration Tab Igmp Snooping 21 Switch Configuration Igmp SnoopingSwitch Conf. Configuration Tab Bridge Multicast 23 Switch Configuration Bridge MulticastSwitch Conf. Configuration Tab Bridge Multicast Forward All 25 Switch Configuration Bridge Multicast Forward AllQoS Tab CoS Settings 26 QoS CoS SettingsQoS Tab Queue Settings QoS Tab CoS to QueueQoS Tab Bandwidth 30 QoS Edit BandwidthSecurity Tab Local Users/System Password Security Tab 802.1x UsersSecurity Tab 802.1x Port Conf. Configuration Is set by the authentication method35 802.1x Port Configuration Change Settings Security Tab Radius Server 36 Security Radius ServerWebView Switches Security Tab Authenticated Users Security Tab Storm ControlSecurity Tab for SRW2048 Switches ACL 40 SRW2048 Switch Security ACLSecurity Tab for SRW2048 Switches Profile Rules 42 SRW2048 Switch Security Profile RulesSecurity Tab for SRW2048 Switches Authentication Profiles 43 SRW2048 Switch Security Authentication ProfilesSecurity Tab for SRW2048 Switches Authentication Mapping 44 SRW2048 Switch Security Authentication MappingSecurity Tab for SRW2048 Switches TACACS+ 45 SRW2048 Switch Security TACACS+Security Tab for Other Switches ACL 46 Fast Ethernet Security ACLSecurity Tab for Other Switches MAC Based ACL Click the Submit buttonSecurity Tab for Other Switches ACL Mapping 49 Fast Ethernet Security ACL MappingSntp Tab Global Settings 50 Sntp Global SettingsSntp Tab Authentication 51 Sntp AuthenticationSntp Tab Servers 52 Sntp ServersSntp Tab Interface Settings 53 Sntp Interface SettingsStatistics Tab Interface Statistics Statistics Tab Etherlike Statistics Statistics Tab Rmon Statistics 56 Statistics Rmon StatisticsWebView Switches Statistics Tab Rmon History Control Statistics Tab Rmon History Log 58 Statistics Rmon History LogStatistics Tab Rmon Alarms 59 Statistics Rmon Alarms60 Statistics add Rmon Alarm entry Statistics Tab Rmon Events Control 61 Statistics Rmon Events ControlStatistics Tab Rmon Events Log Log No. This is the log numberStatistics Tab EAP Statistics Statistics Tab Gvrp Statistics 64 Statistics Gvrp StatisticsLogs Tab Message Log Logs Tab Event LogLogs Tab Global Parameters 67 Logs Global ParametersSnmp v1 Snmp TabSnmp Configuring Snmp Security Defining Snmp SecurityDefining Snmp Views 69 Snmp ViewsDefining Snmp Group Profiles 70 Snmp Group Profile71 Snmp add Group Profile Defining Snmp Group Members 72 Snmp Group MembershipDefining Snmp Communities Snmp Communities Basic TableConfiguring Snmp Notifications Snmp Communities Advanced TablesDefining Snmp Notification Filters 76 Snmp Notification FilterDefining Snmp Notification Recipients 77 Snmp Notification ReceiverMaintenance Tab Reset Maintenance Tab TelnetMaintenance Tab File Download Maintenance Tab File Upload 81 Maintenance File UploadMaintenance Tab Restore Defaults Maintenance Tab Integrated Cable TestMaintenance Tab Http File Download 85 Maintenance Http File DownloadSpanning Tree Tab Global Settings 86 Spanning Tree Global SettingsWebView Switches Spanning Tree Tab STP Interface Settings MAC addressesWebView Switches 88 Spanning Tree Rstp Interface Settings WebView Switches Spanning Tree Tab on SRW2048 Switches Mstp Properties 89 Spanning Tree Mstp PropertiesSpanning Tree Tab on SRW2048 Switches Mstp Instance Settings 91 Spanning Tree Mstp Interface Settings Help Tab Gigabit Ethernet Fiber Optic CablingShared Resources Appendix B Windows HelpNetwork Neighborhood/My Network Places Appendix C Glossary WebView Switches 100 101 102 Appendix D Specifications 802.3z Gigabit Ethernet, 802.3x Flow ControlDimensions SRW2048 16.93 x 1.75 x 13.78 430 mm x 44.45 mm x 350 mmAppendix E Warranty Information Limited WarrantyAppendix F Regulatory Information FCC Statement107 108 109 110 111 112 Appendix G Contact Information
Related manuals
Manual 96 pages 27.9 Kb Manual 2 pages 1.75 Kb

SRW2016, SRW224G4, SRW2048, SRW248G4 specifications

The Linksys SRW2048 is a robust Layer 2 managed switch that caters to the networking needs of small to medium-sized businesses. Designed with performance and reliability in mind, it provides features that ensure optimal network efficiency and security.

One of the standout features of the SRW2048 is its 48 10/100/1000 Mbps Gigabit Ethernet ports, enabling high-speed data transfer and seamless connectivity for various devices within the network. This makes it ideal for environments with heavy data traffic, ensuring minimal latency and high performance.

The SRW2048 also supports advanced Layer 2 management features, including VLAN (Virtual Local Area Network) support, which allows users to segment the network into smaller, manageable sections. This is crucial for improving security and performance, as it reduces unnecessary traffic and potential broadcast storms. With a VLAN configuration, businesses can group users and devices based on function or department, ensuring efficient communication within teams.

In addition to VLAN capabilities, the Linksys SRW2048 incorporates Quality of Service (QoS) features. This technology prioritizes critical network traffic, such as voice over IP (VoIP) and video conferencing, ensuring that these applications receive the bandwidth they require for optimal performance. This is particularly beneficial for businesses that rely on real-time communication tools.

The switch also enhances security through features such as IEEE 802.1X port security, which ensures that only authorized users can access the network. The SRW2048 supports access control lists (ACLs), allowing administrators to set specific permissions for users and devices, further tightening security.

Linksys has also equipped the SRW2048 with a user-friendly web-based management interface, simplifying the process of configuring and monitoring network performance. This accessible interface allows IT personnel to quickly identify issues, manage traffic, and configure settings without extensive training.

Another notable characteristic of the Linksys SRW2048 is its robust build quality and reliability. With a metal chassis and fanless design, it maintains a low acoustic footprint and ensures passive cooling, making it suitable for office environments.

Overall, the Linksys SRW2048 is a feature-rich managed switch that combines advanced networking technologies, efficient performance, and security features to meet the diverse needs of modern businesses. Its scalability, manageability, and robust construction make it a valuable addition to any network infrastructure.
Top Page Image Contents