DirecTV HIRD-E86 manual Finding the Correct Antenna-pointing Coordinates, Oval Dish

	Setting Up the Satellite Dish Antenna and Terrestrial Inputs
Oval Dish 2	Highlight this selection if you connected a DIRECTV PLUS™ oval dish
	antenna with two LNBs. This setting allows the HD receiver to receive signals
	from Satellite A at 101° and Satellite B at 119°, enabling reception of
	DIRECTV High Definition programming throughout the United States as
	well as local stations in specific cities. Most users will have this type of dish.
Oval Dish 3	Highlight this selection if you connected a DIRECTV PLUS™ oval dish
	antenna with the optional Satellite C LNB kit purchased separately from your
	local satellite system installer. This setting allows the HD receiver to receive
	signals from Satellite A at 101°, Satellite B at 119°, and Satellite C at 110°,
	enabling the reception of local stations in additional specific cities in the
	United States.
Cancel	Highlight this selection to return to the DISH SETUP screen without making
	a dish antenna type selection.

Highlighting a selection button as explained immediately above and pressing the SELECT key on the remote control will confirm the selection and return to the DISH SETUP screen.

Finding the Correct Antenna-pointing Coordinates

The POSITION pop-up menu will provide you with the correct coordinates to point your dish antenna. This is important to receive all of the channels you are entitled to when you subscribe to DIRECTV.

Highlighting the Position button on the DISH SETUP menu and pressing the SELECT key on the remote control will display the POSITION pop-up menu. Using the ▲ and ▲ keys, and highlighting either the ZIP Code or Latitude/Longitude button and pressing the SELECT key on the remote control will display the corresponding

pop-up menu.The ZIP Code pop-up menu

To select a digit, use the number keys or the ▲ and ▲ keys on the remote control to enter your ZIP Code or Latitude and Longitude. After the last number has been entered, highlight the OK button and press the SELECT key on the remote control to confirm the entry. The RESULTS screen will display. Highlighting the cancel button and pressing the SELECT key on the remote control will return to the DISH SETUP menu.

Page 4-3