Advantech PCM-3350 Series user manual Safety precautions, Ethernet connector CN1 PCM-3350F/N only

Page 20

2.3 Safety precautions

Warning! Always completely disconnect the power cord from

your board whenever you are working on it. Do not

make connections while the power is on, because sensitive electronic components can be damaged by a sudden rush of power.

Caution! Always ground yourself to remove any static charge before touching the board. Modern electronic devices are very sensitive to static electric charges. Use a grounding wrist strap at all times. Place all electronic components on a static-dissipative surface or in a static-shielded bag when they are not in the chassis.

2.4Ethernet connector (CN1) (PCM-3350F/N only)

The PCM-3350F/N is equipped with a high performance 32-bit PCI-bus Fast Ethernet interface which is fully compliant with IEEE 802.3u 100/10Base-T specifications. It is supported by all major network operating systems.

2.4.1 Ethernet connector (CN1)

10/100Base-T connects to the PCM-3350F/N via an adapter cable to the 10-pin 2 mm connector.

2.4.2 Network boot

The network boot feature is built into the BIOS. It can be enabled or disabled in the chipset setup of the CMOS configuration. Refer to "BIOS Setting" in Chapter 4 for more information.

2.5 LCD display connector (CN2)

CN2 is a 40-pin dual-in-line header and is used to connect an LCD display.

1 0 PCM-3350 User's Manual

Image 20

Contents PCM-3350 Series Copyright notice AcknowledgementsPacking list Contents Software Configuration Appendix a Programming the Watchdog Timer Appendix D System Assignments Figures Tables Page General Information Introduction Features VGA function SpecificationsStandard SBC functions Mechanical and environmental Ethernet functionSolid state disk Board dimensions PCM-3350 dimensionsInstallation Connectors Label FunctionLocating connectors Safety precautions Ethernet connector CN1 PCM-3350F/N onlyEthernet connector CN1 Network boot2 RS-232/422/485 connection COM2 CN4 RS-232 CN18 RS-422/485 Serial ports CN3 COM1 CN4 COM2/RS-232 CN18 COM2/RS-422/4851 RS-232 connection COM1 CN3 Connecting the hard drive Eide HDD connector CN5PC/104 connector CN6 Parallel port connector CN7 Backlight connector CN8VGA connector CN9 Main power +5 V / +12 V connector CN11Connecting the floppy drive 13 PS/2 keyboard/mouse connector CN12FDD connector CN14 USB connector CN17 CompactFlash socket CN16Auxilary power connector MJ1-A Multifunction Jumpers MJ1Fan connector MJ1-B Reset button connector MJ1-CIR connector MJ1-D Watchdog timer configuration MJ1-EInstalling SODIMMs SO Dimm socket Slot1Installation Page Software Configuration VGA display software configuration Utility CD diskMake sure that you do not run AWDFLASH.EXE Connections for two standard LCDs Connections for Toshiba LTM10C042640 x 480 TFT color LCDConnections for Toshiba LTM12C275A 800 x 600 TFT color LCD Connections for Toshiba LTM12C275APage Award Bios Setup System configuration verification System test and initializationEntering setup Standard Cmos setup Cmos setup screenBios features setup Bios features setupChipset features setup ChipsetPower management setup Power management setup6 PnP/PCI configuration PnP/PCI configurationIntegrated peripherals Integrated peripheralsChange password Enter PasswordSave & exit setup Exit without savingPage PCI Bus Ethernet Interface Installation of Ethernet driver Installation for Windows 98/2000 \PC104\3350\LAN\82559ER\W9x&w2k Correct path for Windows NT is Further information Svga Setup Chipset Display memory\PC104\3350\VGA\Win9xc40 Page Svga Setup Choose Yes, then click Finish to restart the computer Installation for Windows NT Press the Change... button Click on the Have Disk... button Select the highlighted item. b. Press OK Press Yes to proceed Press OK to reboot Svga Setup Further information Programming Watchdog Timer Programming the watchdog timer REM Subroutine #1, takes 1 second to complete Page Installing PC/104 Modules Installing PC/104 modules Figure B-2 PC/104 module dimensions mm ±0.1 Low active Pin Assignments Ethernet connector CN1 LCD connector CN2 COM1 connector CN3 COM2 connector CN4Eide hard drive connector CN5 For details on PC/104 connectors, please refer to Appendix B GND Backlight Enable Main power +5 V connector CN11 11 PS/2 keyboard/mouse connector CN12Index USB connector CN17 13CompactFlash socket CN16 Figure C-1 CompactFlash socket 14 COM2 connector for 422/485 CN18 Multifunction Jumpter MJ1Low active Page System Assignments System I/O ports Addr. range Hex DeviceDMA channel assignments Interrupt assignments Interrupt# Interrupt sourceVGA Bios 1st MB memory map