Black & Decker PSS100B Activating the Unit, Charging the Unit, Viewing Battery Charge Status

Page 6

PSS100B_ManualEN_082807.qxp 9/13/07 5:32 PM Page 5

PREPARING THE UNIT FOR FIRST USE

Activating the Unit

Prior to first use, open the cable compartment located on the back of the unit (refer to the illustrations in the “Controls and Features” section) and push and then slide the ON/OFF Switch to the ON Position; this switch enables the unit to respond to the AC Power ON/OFF Pushbutton and Radio ON/OFF Pushbutton (disabling the Radio and Inverter when these are in the OFF position), protecting the battery from draining.

Note: If this switch is turned OFF and back ON again, the unit will lose all the memory settings; therefore the clock, alarm and programmed radio stations will have to be reset.

Charging the Unit

This unit is delivered in a partially charged state – you must fully charge it before using it for the first time before using it in cordless mode. Initial AC charge should be for 24 hours. Follow the directions in the following section.

AC CHARGING/RECHARGING

For maximum battery life, we recommend the unit be kept fully charged at all times. If the battery is allowed to remain in a discharged state, battery life will be shortened.

MAKE SURE ALL SWITCHES ARE TURNED OFF DURING RECHARGING.

FULLY CHARGE THE UNIT USING THE SUPPLIED 120 VOLT AC CHARGER/ADAPTER BEFORE FIRST USE.

Recharge the unit fully after each use.

Recharge the unit every two months when it has not been used regularly.

Note: Recharging the battery after each use prolongs battery life; frequent discharges between recharges reduces battery life.

120 Volt AC Charging Using the AC Power/Charger Adapter

1.Remove AC Power/Charger Adaptor from the cable storage compartment on the back of the unit.

2.Connect the cube to a standard North American 120 volt wall outlet.

3.Connect the other end of the cord to the jack labeled “DC IN” located inside the cable storage compartment (refer to the illustrations in the “Controls and Features” section).

4.Once fully charged, disconnect the extension cord and return it to the cable storage compartment.

Note: The unit cannot be overcharged using this method.

Viewing Battery Charge Status

 

Battery Status Icon is located on the LCD DIsplay. When the

 

full icon displays, the unit is fully charged. As power is used,

 

the Icon displays partially (fading from left to right), similar to

 

the charge bars on a cell phone. This Icon will blink while the

 

unit is charging, and display completely again once the unit

 

is returned to full charge.

BATTERY STATUS ICON

 

POWERING THE UNIT

Corded Use

1.Remove AC Power/Charger Adaptor from the cable storage compartment on the back of the unit.

2.Connect the cube to a standard North American 120 volt wall outlet.

3.Connect the other end of the cord to the jack labeled “DC IN” located inside the cable storage compartment (refer to the illustrations in the “Controls and Features” section).

Note: When the unit is powered using this method, it will also be in “recharge mode” as long as it is connected to an AC wall outlet, so there is no drain on the built-in battery and it will remain charged.

When the unit is powered using this method, the unit's AC power outlets are disabled. To enable the AC power outlets, disconnect the AC Power/Charger Adapter and turn the unit's AC power button ON.

Cordless Use

This unit has a built-in SLA rechargeable battery, simple push the ON/OFF Power Button to turn the unit on and check the Battery Status Icon periodically on the LCD Display to monitor battery (charge) status.

5

Image 6
Contents POWER-TO-GO Radio Save this Manual for Future ReferenceGeneral Safety Warnings and Instructions for ALL Appliances Read ALL InstructionsSafety Guidelines / Definitions If an extension cord is used, make sure thatFeatures IntroductionFront View Protective FeaturesControls and Indicators Back ViewActivating the Unit Volt AC Charging Using the AC Power/Charger AdapterViewing Battery Charge Status Charging the UnitTo Access User-Programmed Stations Using the RadioUsing the MP3/DIGITAL Music Player COMPARTMENT/CABLE Plug Programming Stations Into MemoryUsing the USB Charging Ports Using the 120 Volt AC Power SupplyAC Power Supply Controls, Indicators and Operation Using the Dual Area LightsSetting Up the Alarm Clock Programming the Clock and Alarm ClockSetting Up the Clock Alarm Clock SettingsBattery Replacement/Disposal AccessoriesService Information Battery DisposalSpecifications RadioGeneral

90521849, PSS100B specifications

The Black & Decker PSS100B is a versatile and efficient electric pole saw designed to make tree pruning and maintenance tasks easier for both homeowners and professionals. This durable tool combines power, convenience, and innovation, making it a popular choice among gardening enthusiasts.

One of the standout features of the PSS100B is its extendable reach. With an adjustable pole that telescopes from 6.5 feet up to 9.5 feet, it allows users to easily reach high branches without the need for a ladder. This feature significantly enhances safety, as it minimizes the risks associated with climbing and provides access to those hard-to-reach spots.

The PSS100B is equipped with a powerful 8-amp motor that delivers ample cutting strength. This robust motor ensures that the saw can handle a variety of tree sizes and types, making it suitable for light to medium-duty pruning jobs. Moreover, the 10-inch Oregon bar and chain provide a reliable cutting capacity, allowing users to slice through branches up to 8 inches in diameter with precision and ease.

Another notable feature of this pole saw is its auto-oiling system. This technology ensures that the chain stays lubricated during use, reducing friction and extending the life of both the chain and the bar. This means less downtime for users worrying about maintenance and more time spent on the job.

Safety is a crucial aspect of any cutting tool, and the Black & Decker PSS100B does not compromise in this area. It includes a protective guard that helps shield users from falling debris while trimming overhead branches. Additionally, the lightweight design of the saw allows for better maneuverability and reduces user fatigue, making it comfortable for extended periods of usage.

User-friendly features enhance the overall experience with the PSS100B. The tool is designed for easy assembly, and the comfortable grip handle ensures a secure hold during operation. This makes it accessible even for those with limited experience in using power tools.

In summary, the Black & Decker PSS100B is an outstanding electric pole saw that combines convenience, safety, and performance. With its extendable reach, powerful motor, auto-oiling system, and user-friendly design, it stands out as an essential tool for tree maintenance, ideal for both residential and professional use. Whether tackling routine pruning or larger landscaping projects, the PSS100B delivers reliable results that make tree care a breeze.