Advantech FPM-8192V/8232V user manual Disclaimer, Troubleshooting

B.1 Disclaimer

We do not recommend using any ammonia or alcohol-based cleaners on the monitor screen or case. Some chemical cleaners have been reported to damage the screen and/or case of the monitor. Seller will not be liable for damage resulting from the use of any ammonia or alcohol-based cleaner.

B.2 Troubleshooting

If your monitor fails to operate correctly, consult the following chart for possible solu- tion before calling for repairs:

Condition	Check Point
The picture does not	Check if the signal cable is firmly seated in the socket.
appear	Check if the Power is ON at the computer
	Check if the brightness control is at the appropriate position, not at
	the minimum.
The screen is not	Check if the signal cable is firmly seated in the socket.
synchronized	Check if the output level matches the input level of your computer.
	Make sure the signal timings of the computer system are within the
	specification of the monitor.
	If your computer was working with a CRT monitor, you should check
	the current signal timing and turn off your computer before you con-
	nect the VGA Cable to this monitor.

The position of the screen is not in the center

Adjust the H-position, and V-position, or Perform the Auto adjust- ment.

The screen is too	Check if the brightness or contrast control is at the appropriate posi-
bright (too dark).	tion, not at the Maximum (Minimum).
The screen is shak- Perform the Auto adjustment..
ing or waving	Moving all objects which emit a magnetic field such as motor or
	transformer, away from the monitor.

Check if the specific voltage is applied.

Check if the signal timing of the computer system is within the speci- fication of monitor.

If you are unable to correct the fault by using this chart, stop using your monitor and contact your distributor or dealer for further assistance.

FPM-8192V/8232V User Manual 30