Removing a Barcode Reader
Use the following instructions to remove a barcode reader from your autoloader. Use Figure 4 as a reference.
Figure 4 Removing a Barcode Reader
1Turn off your autoloader, remove the SCSI cable(s) from the rear panel, and then disconnect the power cord from the outlet.
2The barcode reader is installed on the rear of the autoloader. Using a flat blade screwdriver, unscrew the two screws that secure the barcode reader to the autoloader.
3Unplug the barcode reader cord from the barcode outlet.
4Replace the cover panel that you removed during installation (refer to Installing a Barcode Reader on page 2) to the back of the autoloader, using the screws that secured the barcode reader to the autoloader.
The cover panel prevents dust and other foreign items from entering the autoloader.
5Reconnect the SCSI cable(s) and the power cord to your autoloader.
6Store the barcode reader in a cool dry place.
FastStor 2 Installing or Removing a Barcode Reader | 5 |