EtherHub-16 Quick Start Guide
EMI Warning
FCC Class A Certification
This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions:
1.This device may not cause harmful interference, and
2.This device must accept any interference received,including interference that may cause undesired operation.
Warning: This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart B of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference, in which case the user, at his own expense, will be required to take whatever measures are required to correct the interference.
You may use unshielded or shielded
Warnings 1. Wear an
electrostatic discharge whenever handling this equipment.
2.When connecting this hub to a power outlet, connect the field ground lead on the tri- pole power plug to a valid earth ground line to prevent electrical hazards.
3.The connectors are not for telephone system use.
Les raccordeurs ne sont pas utilisé pour le système téléphonique!
Note: In order to maintain compliance with the limits of a Class B digital device, Accton requires that you use a quality interface cable when connecting to this device. Changes or modifications not expressly approved by Accton could void the user’s authority to operate this equipment. Suggested cable type is:
This Ethernet (50 ohm) for BNC connections: 10BASE2
Thick Ethernet
7