C. Crane CC Radio 2 Setting the Timer, Line OUT Jack, Imer Activation Switch, To SET the on IME

Page 18

Radio Operation

LINE OUT Jack

 

The red jack, labeled LINE OUT, is used to output the audio from the

CCRadio2 to another device such as a recorder, your home stereo, or

some other unit. To do this, you will need an 1/8" stereo patch cord.

Note: The LINE OUT jack differs from a headphone jack because the

volume level of a headphone jack varies depending on the volume of

the radio. The LINE OUT jack has a set line level so the volume is con-

sistent no matter what the position of the volume knob.

1) Plug your patch cord into the LINE OUT jack on the CCRadio2.

2) Plug the other end of the patch cord into the LINE IN or AUDIO IN

of the device you want to send the audio to and you will hear the

radio through the other source. You can still listen to the CCRadio2

while using the LINE OUT jack.

is for use with a recorder

imer Activation Switch

The black jack labeled with this symbol

that has a timer activated switch. You would use this switch if you want-

ed to do a timed recording. It is used in conjunction with the LINE OUT

jack. See your recorderʼs instructions to determine if this function will

work with your recorder.

 

SETTING THE TIMER

Please read this entire section carefully before you start. You must go through the 3 steps listed below without stopping. If you stop for more than 15 seconds, press and hold the Timer Button until

you hear a single beep. Then start at step one again.

Before you begin, program the stations that you will want to record into memory. Refer to page 11 for instructions on programming memory pre- sets. The timer has an ON TIME and an OFF TIME. You must set both in order for the timer to work correctly.

1)

Press and hold the Timer/Set Button until you hear a beep and see

STE

1: TO SET THE ON IME

2)

the word ON, the hour digit and TIMER flash on the display.

Use the Tuning Up/Down Buttons to set the hour, verifying that the

3)

time is set correctly for AM or PM as shown on the display.

Press the Timer/Set Button again so the minutes and the word ON

4)

and TIMER flash on the display.

Use the Tuning Up/Down Buttons to set the minutes.

Page 18

CCRadio2

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Please Read ALL the Instructions Completely Before USE About the CCRadio2 Table of Contents Before Use UnpackingButton Identification Powering Your Radio Getting StartedAC Operation Installing the Batteries Battery ReplacementDisplay Panel CCRadio2 Snooze Feature Sleep Timer FeatureTuning Radio OperationWeather Alert System Turning Off the Weather Alert Setting the Squelch Meter HAM VHF Band 144 to 148 MHZSearching for a NEW Active Frequency Display Light Lock SwitchReset Button Normal operationRecording Accessory Audio & Recording JacksAUX in Jack Line OUT Jack Setting the TimerImer Activation Switch To SET the on IMETo SE OFF TimeDisappears Specifications Specifications AM Antennas AccessoriesRecording Devices FM AntennasStations won’t hold in memory Troubleshooting GuideMy radio shuts off after just a few seconds AM reception is poor inside of my buildingPoor reception on FM, Ham VHF, or Weather band Radio Noise Troubleshooting AM Radio Noise Problems Possible SolutionsAM Tuning & Listening Tips Your Antenna Supplier should be Followedto PRESafety Instructions Read Before Operating EquipmentCCRadio Personal Station LOG Meter HAM Frequency LOG About C. Crane Company Inc Model CCRadio2

CC Radio 2 specifications

The C. Crane CC Radio 2 is a highly regarded portable AM/FM radio that has garnered attention for its impressive performance and user-friendly features. Known for its superior reception capabilities, this radio is especially popular among those who appreciate high-quality sound and reliable access to a wide range of radio stations.

One of the standout features of the CC Radio 2 is its advanced AM reception technology. This radio employs a sophisticated digital radio processing system that enhances AM signal clarity, making it possible to tune into distant stations with minimal interference. Whether you are at home, in your backyard, or on a camping trip, users can enjoy clear broadcasts of their favorite AM programs.

The FM reception also impresses with a wide tuning range and excellent fidelity. The radio is equipped with a high-quality ferrite bar antenna for AM and an external telescoping antenna for FM, which together optimize signal capture and sound quality. This combination allows for clear and rich audio, whether you are listening to local stations or distant signals.

A notable characteristic of the CC Radio 2 is its user-friendly design. The radio features large, easy-to-read knobs for volume and tuning, which ensures that users of all ages can operate it without difficulty. Additionally, it comes equipped with a backlit display that provides a clear view of tuning information in low light situations, making it convenient for evening use.

In terms of sound quality, the CC Radio 2 stands out with its built-in speaker that delivers a robust sound experience. For those seeking an even more personalized listening experience, a headphone jack allows users to connect their headphones for private listening.

The radio also boasts a variety of additional features including a sleep timer, alarm functionality, and a battery backup system that ensures you won't lose your favorite stations during power outages. Its portability, reinforced by its compact design and battery operation, makes it a great choice for outdoor excursions or travel.

In summary, the C. Crane CC Radio 2 combines advanced technology with user-focused design, making it a top choice for radio enthusiasts. With its exceptional reception capabilities, intuitive controls, and high-quality audio output, this radio continues to win the hearts of those who desire the best in portable radio entertainment.
Top Page Image Contents