Binatone 300 Auxiliary Features, Effective Range, Specifications, Channel Frequency Table, Safety

Page 2

5. Auxiliary Features

5.1 LCD Screen Back Light

Every time a button is pressed (except PTT button), the LCD Screen back light will illuminate for 4 seconds.

5.2 Power Saving

Your PMR unit has special circuitry designed to extend the life of your battery. When the unit is not used for 4 seconds, it will automatically switch into a low power mode.

The Power Saving feature does not affect the PMR’s ability to receive transmissions. When a signal is detected, it automatically returns to full power mode.

5.3 Battery Meter Indicator

The PMR can detect the battery charge levels. The Battery icon will display the battery charge status as follows;

Battery charge at high level.

Battery charge at low level.

Important: Replace the Batteries. Use only Alkaline “AAA” 1.2V batteries.

6. Effective Range

The Transmission range of the product is dependent on the environment terrain where it is being used, the following diagram attempts to guide the user on the sort of performance to expect for everyday use.

Signal Strenght

 

Optimum (open area)(1)

 

 

Medium ground based

 

 

obstruction(2)

 

 

Heavily built up area (3)

0 Range (Km)

3

Range Slope

 

Range Check

The Transmission range will be affected as shown in the above diagram. The transmitting range typical values for different environment conditions will be (1) 3 km (2) 1.5 km (3) 750m. It should be remembered that these are only guide values as actual achieved distances will be dependent on the environment and terrrain.

7. Specifications

Channels Available

8 Channels

Output Power (TX)

0.5W

Range

Up to 3 Kms. (2 Miles)

 

 

Channel Frequency Table

Channel

Frequency (MHz)

Channel

Frequency (MHz)

 

 

 

 

1

446.00 625

5

446.05 625

2

446.01 875

6

446.06 875

3

446.03 125

7

446.08 125

4

446.04 375

8

446.0 9375

8. Safety

CAUTION

Damaged Antenna

Do not use any PMR that has a damaged antenna. If a damaged antenna comes in contact with the skin, a minor burn may result.

Batteries

All batteries can cause property damage and/or bodily injury such as burns if conductive material such as jewelry, keys, or beaded chains touch exposed terminals. The material may complete an electrical circuit (short circuit) and become quite hot. Exercise care in handling any charged battery, particularly when placing it inside a pocket, purse, or other container with metal objects.

WARNING

For Vehicles with an Air Bag

Do not place your PMR in the area over an air bag or in the air bag deployment area. Air bags inflate with great force. If a PMR is placed in the air bag deployment area and the air bag inflates, the PMR may be propelled with great force and cause serious injury to the occupants of the vehicle.

Potentially Explosive Atmospheres

Turn your PMR OFF when in any area with a potentially explosive atmosphere , unless it is a type especially qualified for such use ( for example, Factory Mutual Approved). Sparks in such areas could cause an explosion or fire resulting in injury or even death.

Batteries

Do not replace or charge batteries in a potentially explosive atmosphere. Contact sparking may occur while installing or removing batteries and cause an explosion.

Blasting Caps and Areas

To avoid possible interference with blasting operations, turn your PMR OFF near electrical blasting caps or in a “blasting area” or in areas posted: “Turn off the two- way radio.” Obey all signs and instructions.

NOTE: Areas with pot ent iall y explosive atmo spheres a re often, but n ot

always ,

clearly marke d. They incl ude fue ling areas such as belo w deck on boats;

fuel or

chemical

transfer or sto rag e faci litie s; areas where the air contains chem ica ls or

par ticles,

such as grain , dust, or me tal po wders; and any other are a where you

wou ld nor mal ly be adv ised to turn off your veh icle engine .

9. Cleaning and Care

To clean your PMR, use a soft cloth dampened with water. Do not use cleaners or solvent, which may cause damage that may not be covered by guarantee.

10. Guarantee and service

The Binatone marina 300 is fully guaranteed for 12 months from the date of purchase shown on you r sales receipt. The guarantee does not cover damage by misuse or negligence, or by excessive voltage.

Please keep your sales (till) receipt - this is your guarantee. You should also keep the original packaging materials.

When unpacking your Binatone marina 300, check for visible damage. If you see any damage, do not use the PM R - return the whole unit to where you bought it.

If your Binatone marina 300 develops a fault, refer to the “ Troubleshooting Guide.” section of this manual. If you can’t solve the problem, return the whole unit as follows;

marina 300

marina 300

Repair after the Guarantee has expired

If the unit is no longer covered by Guarantee, first follow steps 1 as for repair under Guarantee, Then..

2.Call our service Department on 0845 345 9677 and ask for a quotation of the repair charge, and details of where to send your M300 for repair.

3.Return your marina 300 to the address given by the Service Department, making sure to include your name and address, and a cheque or postal order for the value of the repair charge.

This does not affect your statutory rights.

Binatone Telecomplc operates apolicy of continuous product improvement, and so reserves the right to make changes to the product and functions without prior notice.

This equipment is intended for use in:

Austria

Finland

Latvia

Spain

Belgium

France

Liechtenstein

Sweden

Bulgaria

Germany

Luxemburg

Switzerland

Croatia

Greece

The Netherlands

Turkey

Cyprus

Hungary

Norway

UK

Czech

Iceland

Poland

Romania

Denmark

Ireland

Portugal

 

Estonia

Italy

Slovenia

 

Countries of use

11. Troubleshooting Guide

Symptom

Solution

No power.

Check the batteries are installed properly.

 

The batteries may be weak.

 

Replace the old batteries with new ones.

 

 

 

Reception

Press the

(UP) button to increase the receiver volume level.

is weak.

The receiving signal may be weak and/or out of range.

 

 

Cannot change

Key lock mode must be deactivated if the Key lock icon ( ) is

channels.

displayed on the LCD Screen.

 

To change channels, press the MENU button then press the

 

(UP) or

(DOWN) buttons to change the current channel.

 

Batteries may be weak.

 

 

Range is limited.

Batteries may be weak.

 

Replace with new batteries if the battery charge level

 

indicator is low.

 

The maximum range will vary depending on terrain and environment.

 

Open fields provide the maximum range, while steel/concrete

 

structures, heavy foliage, and use in buildings and in vehicles

 

may limit the range significantly.

 

Wearing the radio close to the body, such as in a pocket or on

 

a belt, will decrease range; change the location of the radio.

 

 

Sound distortion

If you are transmitting, speak in a normal tone of voice, 5 cm

problems.

away from the Mic (microphone.).

 

If you are receiving, lower the volume to a comfortable level.

 

Radios too close. Radios must be at least 1.5 meters apart;

 

increase your distance.

 

Radios too far apart. Obstacles interfere with transmission.

 

Talk range is up to 3 Km (2 miles) in clear unobstructed

 

conditions.

 

 

 

 

Declaration of Conformity

The Binatone marina 300 complies with the essential requirements

And conforms to the following relevant standards:

Waste electrical products must not be disposed of with household waste. This equipment should be taken to your local recycling centre for safe treatment.

Binatone Telecom plc operates a policy of continuous product improvement, and so reserves the right to make changes to the product and functions without prior notice.

Binatone Help Line - 0845 345 9677

Binatone Help Line - 0845 345 9677

Caution: Use only same type and make of batteries. To reduce the

Binatone Help Line - 0845 345 9677

risk of electric shock, do not expose this appliance to rain or

moisture.

 

Image 2
Contents Installation LCD ScreenSafety Auxiliary FeaturesSpecifications Cleaning and Care