ADIC DS9000 Series manual Equipment Description, DLT Drives, Options, Scsi Interface

Page 14

Equipment Description

The ADIC DS9000 Series consists of several models: the ADIC 4000, DS9400D/L, DS9700D and DS9800D. All are SCSI compatible, high performance, streaming tape cartridge devices designed for storage of near-line and off- line data.

The DS9400D/L, DS9700D, and DS9800D are equipped with a 2-line by 20-character, back-lit LCD display. The LCD displays drive status messages, error messages, and drive Power-On Self-Test (POST) results messages. The ADIC 4000 uses the drive bezel LEDs to communicate drive operations. The DS9000 Series also includes Flash EEPROM technology that allows easy on-site installation of firmware updates from tape or from the host.

DLT Drives

Your DS9000 Series is equipped with a third-, or fourth-generation DLT drive. The DLT4000 and DLT7000 drives can read and write 2.6 GB, 6.0 GB, and 10.0 GB tape formats for 100% interchange compatibility with earlier DLT drives. The DLT 8000 drive can read and write 10.0, 15.0, 20.0, and 35.0 GB tape formats for 100% interchange compatibility with the DLT 2000, DLT 2000xt, DLT 4000, and DLT 7000 drives. DLT 8000 default tape density is 40 GB (80 GB compressed) when using the DLTTape IV data cartridge. Tape density is selectable by the application software or via the Operator Panel.

Model

Drive

Cartridge Max Capacity

Sustained Transfer Rate

 

Model

(density - compressed mode)

(compressed mode)

 

 

 

 

 

DS9400D/L

DLT4000

20

GB (DLTTape III)

3.0 MB/sec (180 MB/min)

ADIC 4000

 

30

GB (DLTTape IIIXT)

 

 

 

 

 

 

40 GB (DLTTape IV)

 

 

 

 

 

 

DS9700D

DLT7000

20

GB (DLTTape III)

10.0 MB/sec (600 MB/min)

 

 

30

GB (DLTTape IIIXT)

 

 

 

70 GB (DLTTape IV)

 

 

 

 

 

 

DS9800D

DLT8000

20

GB (DLTTape III)

12.0 MB/sec (720 MB/min)

 

 

30

GB (DLTTape IIIXT)

 

 

 

80 GB (DLTTape IV)

 

 

 

 

 

 

Maximum Capacity and Sustained Transfer Rates

Options

SCSI Interface

The DS9000 Series is available with several different SCSI interfaces. These include Single-Ended (SE), Low Voltage Differential/Single-Ended (LVD/SE), or High Voltage Differential (HVD) SCSI interface.

2

Image 14
Contents Installation Operating Guide DS9000 Series §Copyright Notice Copyright Adic 1995, 1996, 1997, 1998, 1999, 2000Iii Copyright Notice EuropeCopyright Adic Europe 1995, 1996, 1997, 1998, 1999, 2000 Blank Regulatory Notices FCC Notices USA OnlyCE Notice IC Notice Canada OnlyEN 55022 Compliance Czech Republic Only Vii Declaration of Conformity ViiiSafety Notices Precautions Safety NoticesTable of Contents Xii Table of Contents Chapter IntroductionOptions Equipment DescriptionDLT Drives Scsi InterfaceFront Panel Controls and Indicators Introduction3DS9700D Front Panel DS9400D/L Front Panel Adic 4000 does not include the LCD Introduction5Front Panel Indicators and Controls Display BeeperRear Panel Controls and Connectors Introduction7Scsi ID Switch AC Power ConnectorScsi Channel Connectors Data CartridgeApplication Software Other RequirementsScsi Host Adapter Introduction9Blank Installation Connecting the Interface Cable Checking the AccessoriesInstalling the Host Adapter 12InstallationInterface Cables Host Computer Terminator Connecting More than One DS9000 Series UnitInstallation13 Setting the Scsi ID 14InstallationCheck the Scsi Bus Termination Connecting Power and Turning OnInstallation15 Installing5the Application Software 16InstallationOperation and Maintenance Operation and Maintenance Power-on Self-TestDrive State LED Indicator Displays and Drive Actions Drive StatusLCD Messages DS9400D/L, DS9700D and DS9800D Drive State LCD MessageLEDs or All Left Indicator Panel Use Cleaning TapeAll Right Indicator Panel Tape in UseAll Right Indicator Panel LCD Messages DS9400D/L, DS9700D and DS9800D only Drive Operating Condition LCD MessageDrive Operating Condition LCD Message Drive Operating Condition Loading the Data Cartridge Lift up on the Cartridge Insert/Release HandleLoading a Data Cartridge Tape in Use Right Indicator PanelData Protection State Meaning Tape in UsePush the Cartridge Insert/Release Handle closed Cleaning the Tape HeadRemoving the Data Cartridge Drive Operating Condition LCD Message Cleaning the Enclosure Troubleshooting and Diagnostics If . . .Then . . .Response Troubleshooting ChartTroubleshooting and Diagnostics If . . .Then . . .Response Use Cleaning Tape LED Why the Use Cleaning Tape LED Gets Turned onHigh Humidity When Assistance is Required Calling ADIC’s Technical Assistance Center AtacSpecifications AppendixReliability 38SpecificationsEnclosure PhysicalDrive Configuration DLT4000 Drives Drive ConfigurationScsi Bus Parity DLT7000/DLT8000 Tape Drive Connectors right side DLT7000/DLT8000 DrivesScsi Bus Termination and Terminator Power DLT4000 Tape Drive Connectors right sideTRM PWR/TRM ENB Jumper Positions ResponseTerm Power Pins on TRM PWR Connector Index 46Index Index47 48Index

DS9000 Series specifications

The ADIC DS9000 Series is a robust storage solution designed to meet the demanding requirements of enterprise environments. Known for its high-performance capabilities, this series of products offers features that cater specifically to data-intensive applications, making it a preferred choice for organizations looking to optimize their data management strategies.

One of the main features of the ADIC DS9000 Series is its scalability. The architecture allows businesses to start with a configuration that meets their current needs, with the flexibility to expand as data storage requirements grow. This adaptability makes it suitable for various industries, including finance, healthcare, and media, where data volumes continuously increase.

Another significant characteristic is its advanced data protection mechanisms. The DS9000 incorporates features such as RAID support, which enhances data redundancy and reduces the risk of data loss. This is crucial for enterprises that rely on the availability of their data around the clock. Furthermore, the system supports automated backup and recovery processes, ensuring that critical data remains safe and can be quickly restored in case of an emergency.

The DS9000 Series leverages cutting-edge technologies, including high-speed connectivity options such as Fibre Channel and iSCSI. These technologies enable fast data transfer rates and lower latency, which are essential for real-time applications and high-throughput environments. Enhanced performance is achieved through optimized caching techniques and intelligent management of read/write operations, contributing to an overall efficient data handling experience.

Additionally, the ADIC DS9000 focuses on energy efficiency. The design incorporates features that reduce power consumption, which is an important consideration for organizations seeking to minimize operational costs. Coupled with a modular design, the series not only provides high performance but also ensures easy maintenance and upgrades, further extending the lifespan of the storage solutions.

In terms of management, the DS9000 Series offers intuitive software tools that allow administrators to monitor performance, manage storage resources effectively, and automate routine tasks. This ease of management is a critical aspect that allows IT teams to allocate their time towards strategic initiatives rather than being bogged down by routine maintenance.

Overall, the ADIC DS9000 Series stands out as a comprehensive storage solution that marries performance, scalability, and reliability to cater to the evolving needs of modern enterprises. Its advanced features and technologies position it as a leader in the storage market, making it an ideal choice for organizations aiming to harness the power of their data.