Perreaux SXV1 owner manual Capacitance Loading, Gain Setting Table

Capacitance

Loading

Table

Gain Setting Table

Use this table to match the capacitance loading characteristics of your SXV1 to that recommended by your cartridge manufacturer, where switch in UP position is OFF and switch in DOWN position is ON. Consult your cartridge documentation for the correct capacitance figure.

C Load		Dip Switch Setting
(pF)	6	7	8	9
27	UP	UP	UP	UP
54	DOWN	UP	UP	UP
74	UP	DOWN	UP	UP
101	DOWN	DOWN	UP	UP
297	UP	UP	DOWN	UP
324	DOWN	UP	DOWN	UP
344	UP	DOWN	DOWN	UP
371	DOWN	DOWN	DOWN	UP
417	UP	UP	UP	DOWN
444	DOWN	UP	UP	DOWN
464	UP	DOWN	UP	DOWN
491	DOWN	DOWN	UP	DOWN
687	UP	UP	DOWN	DOWN
714	DOWN	UP	DOWN	DOWN
734	UP	DOWN	DOWN	DOWN
761	DOWN	DOWN	DOWN	DOWN

Use this table to configure the gain characteristics of your SXV1 to suit the output voltage of the cartridge you are using, where switch in UP position is OFF and switch in DOWN position is ON.

Consult your cartridge documentation for it’s rated output voltage. Set the gain configuration where the “Sensitivity” of your SXV1 is within ±25% of your cartridge output voltage. If no configuration falls into this bracket, use the setting with the sensitivity higher than your cartridge output voltage.

Gain	Sensitivity	S/N Ratio	THD+N	Dip Switch Setting
(dB)	(mV)	(dB)	(%)	10	11	12
40	7.57	81.9	0.010	UP	UP	UP
50	2.36	74.6	0.022	DOWN	UP	UP
59	0.81	64.0	0.058	UP	DOWN	UP
61	0.66	62.6	0.067	DOWN	DOWN	UP
70	0.23	55.4	0.122	UP	UP	DOWN
71	0.22	55.1	0.188	DOWN	UP	DOWN
72	0.18	54.6	0.199	UP	DOWN	DOWN
73	0.17	53.4	0.203	DOWN	DOWN	DOWN

13