Basic Setup
Setting up the Digital Home Theater system
You must connect all the speakers and setup the system properly in order to enjoy the Cinema experience at home. You will have the feeling of being in the middle of the action, because sound is coming from everywhere around you. The subwoofer can enhance the bass performance of your system dramatically.
1Press the EQUALIZER button to select a channel. The level of the channel will appear on the front panel display. (FL, FR, C, SL, SR, SUB, TRE, BASS change cyclically) TRE (Treble level) and BAS (Bass level) adjustable range: - 10 dB to +10 dB, at 2 dB/step.
2Use the TUNER+ and TUNER- buttons to adjust the selected channel’s level.
The value will be stored in the system automatically when you release the TUNER+ or TUNER- buttons for a few seconds.
3Press the DSP key, the surround mode will show on VFD.
Note:
The optional items vary with the change of listening mode.
To adjust the volume of all the speakers (Master Volume) at one time
Use the VOL+ and VOL- buttons in normal mode.
Enter Setup Menu
1Press STOP to enter SETUP MENU when a DVD/VCD/CD disc is playing. Press INFO twice after press STOP when a mp3 disc is playing. (If there is no disc in the disc tray, system will enter SETUP MENU automatically)
2Use 
/ 
/ 
/ 
to select your preferred option.
3Press OK to confirm a highlighted selection.
4To exit setup menu, return to the main menu and select Play.
General setup
EN
1. Setting the TV display
You can select the aspect ratio of the TV display.
•4x3 Standard
If you have a conventional TV set and your DVD is not formatted for
widescreen viewing, use this setting. A wide picture is displayed on the whole TV screen with a portion automatically cut off.
• 4x3 Letterbox
If you have a conventional TV set and your DVD is formatted for widescreen viewing, use this setting. Wide bands will be displayed on the upper and lower portions of the TV screen.
• 16x9 Widescreen
If you have a widescreen TV set, use this setting (you must also set your widescreen TV to “full size”)
2. Selecting the language for OSD
This function allows you to select the desired language. The default setting is English.
Option: English, French, German, Italian, Spanish.
9