Arcam T32 The CR90 Universal remote controller, Source keys, E-14, Select the source key first

remote control

The CR90 Universal remote controller

The CR90 is a sophisticated ‘universal’ remote control that can control up to eight devices. It’s pre-programmed for use with the T32 and many other Arcam products (amplifers, CD-players and DVD-players).

With its extensive built-in library of codes, it can also be used with thousands of other audio-visual components

–TVs, satellite and set-top boxes, PVRs and third-party CD players. See the final section of the CR90 Handbook for a list of these.

The CR90 is a ‘learning’ remote, so you can teach it almost any function from an old single-device remote. You can also program the CR90 to issue a sequence of commands (‘macros’) from a single button press – see the CR90 Handbook for details.

Source keys

As the CR90 can control your T32 as well as a range of other equipment, many of the buttons have more than one function depending on the ‘device mode’ or ‘page’ selected.

The device selection keys: DVD, SAT, AV (TV), TUN, AMP and AUX, both select the source and configure the CR90 to control the particular source.

In other words, the buttons are often ‘context sensitive’ so you’ll have to tell it what sort of device you wish to control (press the AV button for a video display, for example) before you can control it.

Select the source key first

Remember to select a source key before pressing command buttons – commands vary depending on the source selected!

To control the T32 tuner, press TUN.

���	���	��	���
���	���	���	��

DVD	DVD player
SAT	Satellite set-top box
AV	Audio-visual sound input (use with TV)
Tun	DAB, FM or AM tuner, such as the T32
AMP	Controls the features of a compatible
	amplifier, such as Arcam’s A38
AUX	Auxiliary input, or an iPod via an rDock
	or rLead
PVR	Personal Video Recorder
CD	Compact Disc player

�		�		�
�		�		�
�		�		�
				���
�����		�	��	�����
			������
				���
�����		�����		���
���	���		��	���
���	���		���	��
����				����
����
			����
				��

Inserting batteries into the remote control

1.Open the battery compartment by pressing the button on the back of the handset.

2.Insert four ‘AAA’ batteries into the battery compartment – one pair facing the top of the unit, and one pair facing the end, as in the diagram.

3.Lower the end cap onto the plastic locating plate in the handset. This acts as a hinge, and you can now push the end cap firmly into its locked position with a click.

������	����		������
����			���
			����
�������	������	�����	����
�����	�����	�����	����
	����

E-14