Paxar TC6037EM manual Pinch and Feed Rollers, Platen Roller

Page 38

4. Use a dry, soft-bristle brush, such as a toothbrush, to clean either the standard (black) or linerless (red/orange textured) platen roller.

Platen Roller

5. Turn the platen roller with your finger, and then continue cleaning.

6. Reload the supplies and close the label deflector and supply cover.

NOTE: DO NOT use alcohol or solvents on linerless (red/orange textured) platen rollers.

If the brush does not remove all the adhesive:

♦use isopropyl alcohol ONLY on the standard (black) platen roller. Moisten a cotton swab with isopropyl alcohol and run the cotton swab across the platen roller. Turn the platen roller with your finger to make sure the platen roller is clean all the way around. After cleaning, feed several inches of supply through without printing to remove any remaining isopropyl alcohol.

♦Call Service to clean the linerless (red/orange textured) platen roller.

Pinch and Feed Rollers

To clean the pinch and feed rollers:

1. Turn the printer off and open the supply cover.

2. Remove the supplies. See “Removing Supplies” in Chapter 3.

5-4 Care and Maintenance

Image 38

Contents Monarch Pathfinder Ultra Gold Printer Trademarks TA B L E O F C O N T E N T S Using BatteriesUsing Supplies IntroductionGlossary Reference Information Care and MaintenanceTroubleshooting T R O D U C T I O N T t i n g S t a r t e dI n g t h i s M a n u a l G u l a t o r y C o m p l i a n c eIntroduction R o p e a n E c o n o m i c a r e a I n g t h e M a i n B a t t e r y Battery UseI N G B AT T E R I E S Battery Compartment Door Button Charging the Main BatteryChanging the Main Battery Main Battery I n g t h e B a c k u p B a t t e r yChanging the Backup Battery Backup Battery I n B a t t e r y S a f e t y I n f o r m a t i o n Using Batteries Using Batteries I N G S U P P L I E S A d i n g S u p p l i e sCover Latch Buttons Supply HolderLoading for Peel Mode Label Deflector Applicator Roller Peel Bar Label DeflectorUsing Supplies Applicator Roller Label Deflector Loading for Non Peel ModeM o v i n g S u p p l i e s Using Supplies Using Supplies Keys Description S I C O P E R AT I O N SI n g t h e K e y p a d Entering Data A n n i n g B a r codes Indicator DescriptionI n g t h e D i s p l a y Reading the Status LineBasic Operations Basic Operations R t i f i c a t i o n N o t e D i o F r e q u e n c y C o m m u n i c a t i o n s I n t i n gW e r M a n a g e m e n t T a c h i n g t h e S a f e t y S t r a p L p f u l R e m i n d e r s Basic Operations R E a N D M a I N T E N a N C E E a n i n gPrinthead Platen Roller PrintheadPinch and Feed Rollers Platen RollerSensors On-Demand SensorScanner Window Black Mark SensorAdhesive Buildup Scanner Flex Cable E a r i n g S u p p l y J a m sScanner Flex Cable O r i n g t h e P r i n t e r Pinch Roller Feed Roller is behind itTroubleshooting Problem SolutionError Codes Codes DescriptionO S S a R YA Term DefinitionGlossary Specification s C e s s o r i e s / O p t i o n s