Technicolor - Thomson CS700 user manual Troubleshooting Tips Maintenance

Troubleshooting Tips

Maintenance

EN mp3 Player

Disconnect the audio system from the power source before performing any maintenance.

CD Lens Care EN

Problem Solution

The player • Battery may be inserted

does not incorrectly.

turn on • Battery may be empty. when

PLAY button pressed.

Skipping • Repeat or random function may

tracks or be activated.

bad sound • There may be strong magnetic

quality? fields (e.g. too close to TV) near the unit.

•Low Battery level. Replace with new one.

Cannot • LOCK function may be

perform activated.

playback? • There may be no mp3 tracks in the card or internal memory.

• Memory Card may be damaged.

Cannot • Make sure audio tracks are

playback encoded in the mp3 or

tracks on Windows Media formats at

the player. supported bitrates.

Bitrates support by the player: mp3 – 32 to 320 kbps

wma – 48 to 160 kbps

•WMA files may be DRM protected and you don’t have the proper rights (license) to play the files.

Check the website and/or application help system of the music download service provider from where the content was purchased from for license acquisition details.

For more information on how license acquisition works, go to

www.microsoft.com/windowsmedia/drm.

Problem Solution

What does PlaysForSure is a new logo

the program from Microsoft®. PlaysForSur Consumers can match the

e logo PlaysForSure logo on a large

mean? selection of devices and online music stores. If you see the logo, you’ll know your digital media will play for sure.

For more information on the Microsoft PlaysForSure program, visit www.PlaysForSure.com.

For more information on RCA PlaysForSure devices, visit www.thomson-lyra.com.

USB display • Check connection between

does not your unit and the computer. appear

when connected to computer.

The player • To reset the unit, turn the

does not player off by removing the

respond to battery. Reinsert the battery

keyproperly and turn the player

operations? on again to resume normal

operations.

Note:

This unit may temporarily cease to function if subjected to electrostatic disturbance. To resume normal operation, it may be necessary to cycle the power off and back on or to remove and reinstall the batteries.

Cleaning

Clean the exterior of the system using a soft dust cloth.

CD Player

CAUTION! This system operates with a laser. It must be opened by only a qualified technician.

Handling CDs

•Do not touch the signal surfaces. Hold CDs by the edges, or by one edge and the hole.

•Do not affix labels or adhesive tapes to the label surfaces.

•Do not scratch or damage the label.

CDs rotate at high speeds inside the player.

•Do not use damaged (cracked or warped) CDs

Cleaning CDs

•Dirty CDs can cause poor sound quality. Always keep CDs clean by wiping them gently with a soft cloth from the inner edge toward the outer perimeter.

•If a CD becomes dirty, wet a soft cloth in water, wring it out well, wipe the dirt away gently, and then remove any water drops with a dry cloth.

•Do not use record cleaning sprays or antistatic agents on CDs. Also, never clean CDs with benzene, thinner, or other volatile solvents which may cause damage to disc surface

When your CD lens gets dirty it can also cause the system to output poor sound quality. To clean the lens you will need to purchase a CD lens cleaner which can maintain the output sound quality of your system. For instructions on cleaning the CD lens, refer to the ones accompanying the lens cleaner.

Technical Specification

Power supply: 230V~50Hz Dimensions ( H x W x D inches): Unit size - 11 x 7.3 x 12 Speaker - 11.5 x 7.8 x 8.6

CD player: Response curve (+/- 2dB): 60Hz to 5kHz

Rating Plate: Look for it at the back of the set.

Maximum size of Mass Storage Class device supported: 20 GB

Supported SD card memory size: 32 / 64 / 128 / 256 / 512 / 1024 MB

Supported MMC card memory size: 32 / 64 / 128

MB

29 30